Viewing 802.1X Open Vlan Mode Status - HP ProCurve 6400cl Series Access Security Manual

Configuring Port-Based and Client-Based Access Control (802.1X)
Displaying 802.1X Configuration, Statistics, and Counters
1
2
Items 1 through 3 indicate that an authenticated c ient is connected to port 2:
1.Open in the Status column
2. Authorized in the Authenticator State column
3.The Auth VLAN ID 101) is also in the Current VLAN ID column. (This assumes that the port is not a statically configured (
member of VLAN 101.)
4.A "0" in the row for port 3 indicates there is no Authorized VLAN configured for port 3.
5.No PVID" means there is currently no untagged VLAN membership on port 4.
6
Figure 10-5. Example Showing Ports Configured for Open VLAN Mode
10-44

Viewing 802.1X Open VLAN Mode Status

You can examine the switch's current VLAN status by using the show port-
access authenticator vlan and show port-access authenticator < port-list > com­
mands as illustrated in figure 10-5. Table 10-2 describes the data that these two
commands display. Figure 10-6 shows related VLAN data that can help you to
see how the switch is using statically configured VLANs to support 802.1X
operation.
4
l
In these two show
appearing in the Current VLAN ID column for the
same port indicates an unauthenticated client is
connected to this port. (Assumes that the port is
not a statica y configured member of VLAN 100.)
3
Note: 5300xl switches running software re
E.09.xx or greater do not include the Authenticator
State and Authenticator Backend State
shown in th s figure.
5
outputs, an Unauth VLAN ID
ll
fields
i
lease