Displaying 802.1X Configuration, Statistics, And Counters; Show Commands For Port-Access Authenticator - HP ProCurve 6400cl Series Access Security Manual

Configuring Port-Based and Client-Based Access Control (802.1X)

Displaying 802.1X Configuration, Statistics, and Counters

10-42
Displaying 802.1X Configuration,
Statistics, and Counters
802.1X Authentication Commands
802.1X Supplicant Commands
802.1X Open VLAN Mode Commands
802.1X-Related Show Commands
show port-access authenticator
show port-access supplicant
Details of 802.1X Mode Status Listings
RADIUS server configuration

Show Commands for Port-Access Authenticator

Syntax: show port-access authenticator [< port-list >]
[config | statistics | session-counters | vlan]
• Without [< port-list > [config | statistics | session-counters
• With < port-list > only, same as above, but only for the
• With [< port-list > [config | statistics | session-counters |
• With [config | statistics | session-counters | vlan] only,
For more on the [config | statistics | session-counters | vlan]
options refer to the next section of this table.
page 10-15
page 10-38
page 10-21
below
page 10-48
page 10-44
pages 10-20
| vlan]], displays whether port-access authenticator is
active (Yes or No) and the status of all ports
configured for 802.1X authentication. Includes the
the port traffic priority (CoS) assigned to inbound
traffic and the rate-limit settings, if any, specified by
a RADIUS server for a current 802.1X authenticated
client session. (Refer to "Configuring a RADIUS
Server To Specify Per-Port CoS and Rate-Limiting
Services" on page 6-21 in this guide.)
specified port. Does not display data for a specified
port that is not enabled as an authenticator.
vlan]], displays the [config | statistics | session-counters]
data for the specified port(s). Does not display data
for a specified port that is not enabled as an
authenticator.
displays the [config | statistics | session-counters] data
for all ports enabled as authenticators.