Related Manuals for QERIDOO Kidgoo1 2020
Summary of Contents for QERIDOO Kidgoo1 2020
- Page 1 U��� M���A� Q8-20 Q9-20 Q8S-20 Q9S-20 Kidgoo1 2020 Kidgoo2 2020 This product fulfils all safety requirements of the European standard for bicycles and bicycle trailers (DIN EN 15918).
- Page 2 When necessary, individual items of information can be changed quickly and without special notification. This documentation can be ordered from Qeridoo GmbH in other languages, or is available for download on our website if already available. Visit us at: www.qeridoo.de Copyright All rights to the documentation remain with Qeridoo GmbH.
-
Page 3: Table Of Contents
Contents Removing the buggy wheel (Trailer mode) Introduction Setting the wheel so that it turns freely Proper use (Buggy mode) Performance limits Securing the wheel (Walker mode) Size Insert tow bar Notes on the user manual Using the pennant Attaching the hand strap Safety instructions Putting on the 5-point safety harness Users... -
Page 4: Introduction
Introduction Proper use Kidgoo was designed as a bicycle trailer and comes with an additional buggy and walker function. For Trailer mode, use a tow bar with coupler to connect the trailer to a suitable towing vehicle (bicycle or motorised pedelec with a maximum speed of 25 km/h). With the buggy wheel attached, the Kidgoo can be used as a child carrier in Buggy mode. -
Page 5: Size
Introduction Size Children may be transported up to a maximum size from 116,5 cm. The following additional restrictions apply to Trailer mode: Requirements for the tow bar Kidgoo1 and Kidgoo2 Kidgoo1 and Kidgoo2 Permissible tow bar load range 0 – 8 kg (on the tow bar coupler pocket) Minimum ambient temperature -10° C Requirements for the towing vehicle... -
Page 6: Safety Instructions
Safety instructions Danger! Read the safely instructions below carefully. The safety and accident prevention regulations valid in your region and statutory rules such as the road traffic regulations also apply, and take precedence in cases where there is doubt. Make sure that the Kidgoo is used only by persons suitable for its operation, as defined below. -
Page 7: Passenger
6 years. Special accessories must be used in order to secure children who are under 6 months old or who cannot sit upright independently, see www.qeridoo.de/zubehoer. So that they have sufficient headroom in all situations, the children must »... -
Page 8: Cycling With A Trailer
Safety instructions Cycling with a trailer The way in which the bicycle moves changes significantly when it is pulling a trailer, and » this is particularly noticeable when braking and cornering. With regard to this, pay attention to the following: Practice cycling with the trailer before going out onto the road. -
Page 9: Product Overview
Product overview Scope of delivery Pennant with 2-part pennant staff and Leaf suspension cover (2x) centre piece Wheel axle with suspension* Tow bar with coupler and retaining strap 1 head rest (Kidgoo1) or 2 head rest (Kidgoo2) Push handle with hand strap Rear light (StZVO compliant) Cabin with seats and 5-point safety harnesses... -
Page 10: Components And Control Elements
Product overview Components and control elements Side view Cabin (frame made from aluminium Wheel guard for rejection from tubes with weatherproof fabric cover) obstacles 3-in-1 canopy to protect against insects Tow bar for trailer mode and splash water with integrated sun visor, rollable Tow bar holder Side window (incl. -
Page 11: Rear View
Product overview Components and control elements Rear view Loop for fastening the pennant Coupler pocket with cotter pin fastening and retaining strap for Push button for adjusting the height of securing the tow bar on the the push handle bicycle frame Splash water cover, rollable Handstrap for buggy- and walker-mode... -
Page 12: Assembly
» operation on the Internet: You can find our video tutorials on our YouTube channel » www.youtube.com/user/Qeridoo Danger! Never perform assembly work if there are children in the cabin. Keep children away from the vehicle during assembly. When handling moving components, make sure that your hands or fingers do notget trapped. -
Page 13: Installing The Wheel Axle (Kidgoo2)
Assembly Installing the wheel axle (Kidgoo2) The wheel axle is equipped with adjustable leaf springs. The spring effect of both leaf spring plates can be adjusted by moving a clamp, see „Adjusting the suspension“ on page 29. Screw the wheel axle with the leaf springs to the leaf spring holder of the cabin frame. Loosen the 4 hexagon socket screws from the leaf »... -
Page 14: Installing The Disc Brake (Kidgoo Sport)
Assembly Installing the disc brake (Kidgoo Sport) Follow the instructions in the manual of the Disc Brake Addon. Inserting the wheels Remove the black rubber caps from the ends of the thru-axles and then dispose of them. » Lift the cabin a little bit or place the cabin on its roof in order to install the wheel easier. »... -
Page 15: Installing The Head Protectors
Assembly Installing the head protectors The head protectors serve as additional side protection in case the trailer should tip over. Be sure that the slide rails for the head protectors » are fixed and tightened on both sides. Slide the head protector onto the slide rail as »... -
Page 16: Tightening The Backrest
Assembly Tightening the backrest The stable backrest is an important safety component. For a good stability the belts under the seat and behind the back rest must always be tightened firmly. Put the cabin in the upright position and open the »... -
Page 17: Optional Assembly Steps
Assembly Optional assembly steps Installing the buggy wheel You need the buggy wheel for Buggy and Walker mode. The buggy wheel is connected directly with the wheel suspension attached to the frame and is mounted so that it can rotate through 360 °. -
Page 18: Mounting The Coupler Onto A Bicycle
Assembly Tip! You do not have to remove the tow bar completely. Simply place the tow bar into the tow bar mount from behind to stow it under the cabin floor, see „Insert tow bar“ on page 22. Mounting the coupler onto a bicycle Danger! Make sure that your bicycle is suitable for towing a bicycle trailer, see „Performance limits“... -
Page 19: Installing The Rear Light
The provided universal coupler is suitable for mounting on the most rear-wheel models. If it does not fit your bicycle, find a suitable adapter and special couplers in our manuals on the following website: www.qeridoo.de/kupplungsleitfaden Caution! Do not use a tool which was previously in contact with conventional steel. -
Page 20: Utilisation
Utilisation Below you will find all the information for adapting the Kidgoo to the required modes and to allow you to use all the convenience functions. Operating the parking brake Danger! Apply the parking brake to secure the Kidgoo in order to prevent it from rolling away. -
Page 21: Setting The Mode
Utilisation Setting the mode You can use the Kidgoo in one of the following modes: Trailer mode: Carrying children in the Kidgoo » when cycling. Buggy mode: Using the Kidgoo like a buggy. » Walker mode: Carrying children in the Kidgoo »... -
Page 22: Adjusting The Buggy Wheel
Utilisation Adjusting the buggy wheel You must make the following settings, depending on the mode. Removing the buggy wheel (Trailer mode) The buggy wheel must not be fitted in Trailer mode, because in certain riding situations it can make contact and cause serious accidents. Slightly lift the cabin at the front. -
Page 23: Securing The Load
Utilisation Securing the load Loading the baggage Loading the storage space Undo the magnetic fasteners of the storage space cover and lift it. » Pack larger items such as bags, toys or coats in the storage space. » Close the cover carefully. »... -
Page 24: Strapping In Children
Utilisation Tip! A balanced load distribution is particularly important in Trailer mode. If the two children differ greatly in terms of their weight, you should therefore put the heavier child in the righthand seat. This also applies if you only carry one child in Kidgoo2. Strapping in children Pull the red strap under the seat forward to release »... - Page 25 Utilisation Tip! If the child is too small for the 5-point seatbelts, then we recommend to use the accessories, such as a hammock, a baby seat or a seat reducer if it is able to sit upright. Danger! Before every journey, check that the safety harnesses and harness catches are sitting correctly.
-
Page 26: Checking The Weight Distribution And Tow Bar Load
Utilisation Checking the weight distribution and tow bar load An optimum weight distribution is important for safe handling: The load’s centre of gravity should always lie in the centre of the wheel axle. The tow bar load with which the tow bar lies on the coupler must be neither too great nor too low in Trailer mode: Tow bar load too great (>... -
Page 27: Connecting The Trailer To A Bicycle
Utilisation Connecting the trailer to a bicycle Danger! Do not connect the Kidgoo to a bicycle until the following conditions have been fulfilled: The trailer is fully loaded. » The children wear a bicycle helmet or use a head rest and are properly belted. »... -
Page 28: Using The Comfort Functions
Utilisation Using the comfort functions Using the climate functions Adjusting the 3-in-1 canopy The 3-in-1 canopy is comprised of an insect net, an adjustable sun visor and a weather canopy: The inner part of the 3-in-1 canopy must be closed during every journey because the integral »... -
Page 29: Using The Ventilation Windows
Utilisation Using the ventilation windows The purpose of the ventilation windows of the Kidgoo is to improve air circulation in the cabin. Lateral ventilation windows: To open, release the Velcro fastener of » the window film in the cabin and fold it down. »... -
Page 30: Storage
Utilisation Storage For storage, simply fold the Kidgoo together and store it in a protected and dry place without direct sunlight. Please also consider the information in the chapter „Care“ on page 31. Danger! Hands or fingers can become trapped on moving parts while setting up and folding up the cab. -
Page 31: Care And Maintenance
Care and maintenance Caution! Please note that textiles or fabric parts must always be completely dry in order to avoid the formation of mould and mildew stains. Always use the right raincover when driving in the rain or on snow. To avoid bleaching of the fabric, we do not recommend exposing the trailer to direct sunlight. -
Page 32: When Not In Use
The storage location should be dry, well ventilated and protected against direct sunlight. » At higher storage temperatures, you should store the wheels separately from the cabin » because the tyres’ rubber can cause odours. Use a Qeridoo folding garage if the Kidgoo must be kept outdoors. » Caution! Please note that when using the optional folding garage, the trailer must be completely dry. -
Page 33: Semi-Annually (Or Every 500 Km)
Care and maintenance Semi-annually (or every 500 km) Care for all sliding and moving parts with silicone spray. » Check the spoke tension, which must be between 90 and 100 kg. » Clean the quick-release axle of the tires with silicon spray. »... -
Page 34: Appendix
Appendix Technical data External dimensions Kidgoo1 Kidgoo2 Length (Trailer mode) 155 cm 157 cm Width (external width from wheel to wheel) 67 cm 81 cm Height (from ground to cabin roof) 95 cm 95 cm Height of push handle 58 cm / 120 cm 58 cm / 120 cm (lowest / highest set dimension) Pack size of the collapsed cabin 38 x 54 x 105 cm 38 x 67 x 105 cm... -
Page 35: Warranty Terms
In the event of replacement, the replaced product will become the property of Qeridoo. If the product is no longer held by Qeridoo, a product of a similar type and quality will be replaced at Qeridoo's option. In case of an exchange, the warranty period does not start again and will not be extended. -
Page 36: Support Information
Anhang Appendix Tip! You can easily register a warranty case online (service.qeridoo.de) that guarantees you easy processing. With your complaint, please provide an exact description of the fault (if possible with photos) and a copy of the original purchase receipt. Please also state the vehicle’s serial number. -
Page 37: Spare Parts
Appendix Spare parts (valid from 2020) Frame components Pos. Article Article-No. Kidgoo1 Article-No. Kidgoo2 Head protector set 2019 KPNS-19-SET KPNS-19-SET Parking brake set 2020 FPB-20-SET FPB-20-SET Handlebar set from 2020 HGKG1-20-SET HGKG2-20-SET Folding mechanism set 2020 FMKG1-20-SET FMKG2-20-SET Axle set A1-20-SET A2-20-SET Leaf suspension cover set 2019... -
Page 38: Other Spare Parts
Appendix Other spare parts Star knob for handle bar Belt pad set 2020 Art.-No.: Z-VKDA-20 Art.-No.: GP-20-SET Rubber cap 20“ Wheel 2020 Belt pad left 2020 Art.-No.: Z-GUKA20-20 Art.-No.: Z-GPL-20 Adjustment leaf suspension Belt pad right 2020 (petrol) Art.-No.: Z-GPR-20 Art.-No.: EBP-SET Leaf spring long 166x25... - Page 39 Appendix Pennant holder, centre piece Buggy Multiwheel 8.5“ 2017 Art.-No.: WIM-H-UN Art.-No.: Z-LRMW-8.5-17 Pennant complete 2020 Hub axle for Multiwheel Art.-No.: Y-WIM-20 Art.-No.: Z-SA-MW-17 Wheel cover Mode switch 2020 Art.-No.: RDSH Art.-No.: Z-BASM-20 Wheel guard right 2018 Push button Multiwheel 2020 Art.-No.: Z-RAR-18 Art.-No.:...
- Page 40 Kidgoo 2020 Industriepark Nord 100 Ⅰ 53567 Buchholz Tel +49�(0)�2683�9466577 Ⅰ info@qeridoo.de www.qeridoo.de...
Need help?
Do you have a question about the Kidgoo1 2020 and is the answer not in the manual?
Questions and answers