Related Manuals for QERIDOO Speedkid2 2018
Summary of Contents for QERIDOO Speedkid2 2018
- Page 1 USER MANUAL Q2-18-A Speedkid2 2018 This product fulfils all safety requirements of the European standard for bicycles and bicycle trailers (DIN EN 15918).
- Page 2 When necessary, individual items of information can be changed quickly and without special notification. This documentation can be ordered from Qeridoo GmbH in other languages, or is available for download on our website if already available. Visit us at: www.qeridoo.de Copyright All rights to the documentation remain with Qeridoo GmbH.
-
Page 3: Table Of Contents
Mounting the tow bar Spare parts Mounting the coupler onto a bicycle Installing the rear light (Accessory) Utilisation Applying the parking brake Adjusting the push handle Setting the mode Adjusting the buggy wheel Speedkid2 2018 Subject to change. 12|2017 – 3... -
Page 4: Introduction
The child must be able to sit up independently. For children aged up to 18 months, we recommend using a comfort insert. Minimum age (with baby seat) 1 month Maximum age 6 years Size Maximum height 116 cm 4 – 12|2017 – Subject to change. Speedkid2 2018... -
Page 5: Notes On The User Manual
The tow bar is therefore in front, the push handle behind. In this user manual, the word user refers to the person transporting children with the Speedkid2 making the necessary adjustments on the vehicle. Speedkid2 2018 Subject to change. 12|2017 – 5... -
Page 6: Safety Instructions
Close the inner part of the 2-in-1 cover before each trip to protect children with the safety net ƒ against insects and smaller stones. When in traffic, the weather canopy should also be closed and the ventilation window open to provide protection against exhaust fumes. 6 – 12|2017 – Subject to change. Speedkid2 2018... -
Page 7: Passengers
ƒ specified maintenance intervals, see „Care and maintenance“ on page 29. Use only original accessories and spare parts manufactured or recommended by Qeridoo. ƒ Using other products relieves the manufacturer of liability. ƒ Do not make any structural modifications or extensions to the vehicle. Any manipulation that is ƒ... -
Page 8: Cycling With A Trailer
Always ride defensively and with foresight. ƒ Brake in good time before reaching bends, junctions, obstacles etc. ƒ Always negotiate curbs and uneven surfaces slowly. Keep away from steps, escalators and ƒ very steep stretches. 8 – 12|2017 – Subject to change. Speedkid2 2018... -
Page 9: Product Overview
Remove the packaging material and all protective caps, and dispose of them in accordance with the environmental guidelines that apply in your region. Read the chapter„Assembly“ on page 12 before you assemble parts. Speedkid2 2018 Subject to change. 12|2017 – 9... -
Page 10: Components And Control Elements
FX folding system tube with hinge Trailer mode: Buggy wheel removed Axle suspension Wheel mount on the cabin frame Air valve (Autoventil, Typ Schrader) Front reflector, white 20" wheel with push-in axle Reflector strip 10 – 12|2017 – Subject to change. Speedkid2 2018... -
Page 11: Rear View
Rear light (Optionally available) Pennant pouch for holding the pennant staff Rear reflector, red Release for the folding system 2 pouches for small items Storage space under the push handle Parking brake Speedkid2 2018 Subject to change. 12|2017 – 11... -
Page 12: Assembly
The tube clamps are preset so that the connection can be made slightly above the rear side windows: 12 – 12|2017 – Subject to change. Speedkid2 2018... -
Page 13: Inserting The Wheels
„Applying the parking brake“ on page 19. Check whether there is sufficient air in the wheels (recommended air pressure: 2.5 – 4 bar). If necessary, use an air pump for car valves to top up with air. Speedkid2 2018 Subject to change. 12|2017 – 13... -
Page 14: Installing The Wheel Guard
The stable backrest is an important safety element. Like the cabin’s fabric cover, it is fixed under the cabin floor by harnesses. These harnesses must always be tightened in order to provide a secure hold. 14 – 12|2017 – Subject to change. Speedkid2 2018... -
Page 15: Inserting The Pennant
Loosen the screws on the brake lever holder of the axle using a hexagon socket wrench of the size 5. Insert the brake pedal into the receptacle. Fix the previously loosened screws. Speedkid2 2018 Subject to change. 12|2017 – 15... -
Page 16: Optional Assembly Steps
Release the button so that the locking bolt secures the tow bar in the tow bar mount. Additionally, secure the tow bar by pulling the locking knob slightly backwards, turn about 30 ° and let it return to the closed position. 16 – 12|2017 – Subject to change. Speedkid2 2018... -
Page 17: Mounting The Coupler Onto A Bicycle
Quick-release axle: Tighten the cap nut until you can close the clamp with a certain amount – of pressure. Full axle: Tighten the nut with a spanner. Always pay attention to the bicycle manufacturer’s – notes about the tightening torque. Speedkid2 2018 Subject to change. 12|2017 – 17... -
Page 18: Installing The Rear Light (Accessory)
Fold the push handle to the highest position. Mount the rear light above the left pipe clamp of the pushing handle. Tip! Follow the attached manufacturer's information for the work of the rear light. 18 – 12|2017 – Subject to change. Speedkid2 2018... -
Page 19: Utilisation
Swing the push handle to the desired height. Release the two pushbuttons in order to activate the engagement function. Move the push handle slightly up or down until the height adjustment engages audibly. Speedkid2 2018 Subject to change. 12|2017 – 19... -
Page 20: Setting The Mode
The buggy wheel must not be fitted in Trailer mode, because in certain riding situations it can make contact and cause serious accidents. Slightly lift the cabin at the front. Push the release button at the wheel mount and remove the buggy wheel completely. 20 – 12|2017 – Subject to change. Speedkid2 2018... -
Page 21: Insert Tow Bar
Putting on the 5-point safety harness In every mode, the 5-point safety harnesses must be properly adjusted and every child must be fastened in, see „Adjusting the safety harnesses“ on page 22. Speedkid2 2018 Subject to change. 12|2017 – 21... -
Page 22: Securing The Load
Push the pad and the tongue of the inner left – harness onto the right harness. Push the pad and the tongue of the inner right – harness onto the left harness. 22 – 12|2017 – Subject to change. Speedkid2 2018... -
Page 23: Embarking The Children
A balanced load distribution is particularly important in Trailer mode. If the two children differ greatly in terms of their weight, you should therefore put the heavier child in the right-hand seat. Interacting with the tow bar mounted on the left, this favourably influences handling. Speedkid2 2018 Subject to change. 12|2017 – 23... -
Page 24: Fastening In A Child
„Adjusting the safety harnesses“ on page 22. Check the tow bar load before every journey with a trailer. Tow bar loads outside the permitted range of 3 – 8 kg cause critical handling performance. 24 – 12|2017 – Subject to change. Speedkid2 2018... -
Page 25: Connecting The Trailer To A Bicycle
Insert the cotter pin into the hole and lock the cotter pin fastening. Check that the connection between the coupler and the tow bar is secure. Speedkid2 2018 Subject to change. 12|2017 – 25... -
Page 26: Using The Comfort Functions
The purpose of the ventilation window on the back of the Speedkid2 is to improve the exchange of air in the cabin. Opening the ventilation window: Roll up the cover and lock it with the top Velcro fastener. 26 – 12|2017 – Subject to change. Speedkid2 2018... -
Page 27: Adjusting The Suspension
Always set the same values on both leaf springs; different spring travels can negatively influence the driving behavior. Loose the knurled screw in order to move the clamp on the leaf spring sheets. Move the clamp with the knurled screw according to the following instructions: Speedkid2 2018 Subject to change. 12|2017 – 27... -
Page 28: Storage
In addition, a treatment with cleansers and preservatives such as wax or spray oil every two weeks is recommended. 28 – 12|2017 – Subject to change. Speedkid2 2018... -
Page 29: Care And Maintenance
The storage location should be dry, well ventilated and protected against direct sunlight. ƒ At higher storage temperatures, you should store the wheels separately from the cabin ƒ because the tyres’ rubber can cause odours. Use a Qeridoo folding garage if the Speedkid2 must be kept outdoors. ƒ Speedkid2 2018... -
Page 30: Maintenance Intervals
Check that all screw and cotter pin connections are secure. ƒ Every three years (or every 3000 km) Have a full inspection carried out by a specialist workshop no later than every three years. 30 – 12|2017 – Subject to change. Speedkid2 2018... -
Page 31: Appendix
Type 8,5" air wheel Valve type Car valve (Schrader) Maximum air pressure 1.9 bar Ambient conditions Storage location dry, ventilated, no direct sunlight Temperature range for storage -23 °C – 65 °C Speedkid2 2018 Subject to change. 12|2017 – 31... -
Page 32: Warranty Terms
Appendix Warranty terms Qeridoo provides a two-year warranty commencing on the purchase date for plastic and cover parts, as well as for load-bearing components. This warranty covers only material and manufacturing faults arising on correctly used and maintained vehicles. In particular, the terms and instructions in the user manual that you received with your vehicle are definitive in this respect. -
Page 33: Frame Components
Upper tube Speedkid2 folding mechanism Ø22 set from 2018 ORSKF-22-18-SET Handlebar Speedkid2 set from 2018 HGSK-18-SET Inner room tube Speedkid2 Ø22x90°° Y-IRRSK-22x90 2 stabilizer bars with pipe clamps SIG-58 Lower tube Sportrex folding mechanism Ø22x180 set from 2018 URSRF-22x180-18-SET Speedkid2 2018 Subject to change. 12|2017 – 33... - Page 34 Toggle fastener with strap Wheel cover Art. no.: KÖRD-55 Art. no.: RDSH Harness buckle Art. no.: GRT-899 belt padding from 2017 Art. no.: GPMK-18-SET crotch padding from 2017 Art. no.: Z-SCHPO-17 34 – 12|2017 – Subject to change. Speedkid2 2018...
- Page 35 Notes Speedkid2 2018 Subject to change. 12|2017 – 35...
- Page 36 Speedkid2 2018 Qeridoo GmbH Industriepark Nord 100 53567 Buchholz Germany www.qeridoo.de info@qeridoo.de...
Need help?
Do you have a question about the Speedkid2 2018 and is the answer not in the manual?
Questions and answers