JVC BD-X201M Instructions Manual page 80

Setup Menu
SYSTEM MENU Screen (continued)
SYSTEM MENU (2/2) Screen (continued)
Parameter Possible settings
EE OUTPUT
EE oUT
DIGITAL STILL
STILL
PLAYBACK
NAVIGATION
NAVI
BACK
bACK
80
THROUGH
This parameter is used to select whether to output E-E images from the VIDEO OUT terminal
when in Stop or Recording mode.
[MUTING]
THROUGH : Outputs E-E images.
MUTING
THR
[MUT]
* For either of these settings, the on-screen display is output according to the settings on the
DISPLAY MENU screen.
OFF This parameter is used to select whether to use the frame memory of the DVD recorder to set
digital still mode when the DVD recorder enters Still mode.
[FRAME]
OFF
1st
FRAME
2nd
1st
oFF
[FRM]
2nd
1ST
2Nd
Note
The on-screen display does not appear when DIGTAL STILL is selected.
(Will be displayed during Frame / Field advance.)
[OFF]
This parameter is used to select whether to use the navigator function when playing back a disc
that has been finalized by the DVD recorder.
ON
OFF
[oFF]
ON
oN
Returns to the SYSTEM MENU (1/2) Screen.
: Outputs black images. Set this setting when you want to prevent a loop connection
being used when connected to ultrasound diagnostic equipment.
: The frame memory of the DVD recorder is not used.
: The frame memory of the DVD recorder is used for outputting the frame still image.
: The frame memory of the DVD recorder is used for outputting the 1st field still im-
age.
: The frame memory of the DVD recorder is used for outputting the 2nd field still im-
age.
: The navigator function is not used. Operation is performed in the same manner as
during playback of an unfinalized disc.
: The navigator function is used. Operation is performed in accordance with the set-
ting of TITLE END of the DVD MENU screen.
Description