JVC BD-X201M Instructions Manual page 79

SYSTEM MENU (2/2) screen
Parameter Possible settings
AC IN MODE [POWER ON]
POWER OFF
AC
SYNC SYSTEM
[INTERNAL]
SYNC
TV TYPE [NTSC (U)]
NTSC (I)
TV
VBID OUT (WIDE)
Vbid
Y/C TERMINAL
MODE
Y C TM
OPERATION
LOCK
oPLoCK
For selecting whether to start up in the Operate ON or OFF mode when the MAIN POWER
switch at the rear of this unit is turned ON.
POWER ON : Start up in Operate ON mode
[oN]
POWER OFF: Start up in Operate OFF mode
oFF
AUTO
For selecting the synchronization method for this unit.
AUTO : Switches automatically between internal and external synchronization
INTERNAL : Set to internal synchronization
AUTo
[INTE]
For selecting the signal system during recording and playback.
NTSC (U) : When recording/playing back in the NTSC mode (for USA)
NTSC (I) : When recording/playing back in the NTSC mode (for Japan)
PAL
PAL : When recording/playing back in the PAL mode
[NTU]
This unit will automatically be rebooted when this setting is changed.
NTI
Upon reboot, all menu items except the date/time data and hour meter will be restored to their
PAL
default values. (When NTSC(I) is selected, the clock advances 9 hours.)
[OFF]
For selecting whether to add the JCPX-1204 standard-compliant VBID (Video Blanking ID) sig-
nals to the playback analog video signals output from this unit. (NTSC only)
ON
OFF : Do not add VBID signals (Copyguard signals will be added.)
[oFF]
ON : Add VBID signals
oN
[S1]
This parameter is used to set the specification for the DVD recorder's VIDEO Y/C INPUT and
OUTPUT terminal in order to enable the recording of wide-screen discrimination signals.
S2
S1 : S1 terminal mode is to be adopted. A discrimination signal for normal video with a
4:3 aspect ratio and squeezed video is to be recorded.
S2 : S2 terminal mode is to be adopted. A discrimination signal for normal video with a
4:3 aspect ratio, squeezed video, and letterbox video is to be recorded.
[S1]
S2
Squeezed video: 16:9 wide-screen content with the left and right sides compressed for nor-
Letterbox video : Content with the top and bottom of the screen blackened out.
[OFF] For selecting whether to enable operation lock.
OFF : Operation lock turns OFF and all operation buttons on the main unit are enabled
ON
ON : Operation lock turns ON and operation buttons on the main unit are disabled
[oFF]
However, the CLOSE/OPEN, SET UP, SET and cursor buttons will not be dis-
oN
abled.
Description
mal aspect screens.
Setup Menu
79