JVC BD-X201M Instructions Manual page 59

Entering Names and Comments for Chapter Menus
THUMBNAIL EDIT
TITLE CLOSE
AAA BBB CCC
1.
1 2
DDD EEE FFF
4 5
CHAPTER MENU TEXT LOAD
THUMBNAIL EDIT
BACK
CHAPTER
AAA
LENGTH:
POSITION:
2.
PREVIEW
TEXT INPUT
THUMBNAIL EDIT
BACK
CHAPTER
AAA
LENGTH:
POSITION:
3.
TITLE INPUT
april
CANCEL
5.
THUMBNAIL EDIT
BACK
CHAPTER
AAA
LENGTH:
april
POSITION:
PREVIEW
TEXT INPUT
THUMBNAIL EDIT
TITLE CLOSE
AAA BBB CCC
april 2
DDD EEE FFF
4 5
CHAPTER MENU TEXT LOAD
Display Characters
The characters displayed in title and
chapter menus depend on the title or
chapter pattern that has been selected.
A preview allows actual display charac-
ters to be confirmed.
Note that at the time of purchase, dis-
play characters will be as follows.
PATTERN No. Display characters
1 17 × 2 (34)
2 17 × 2 (34)
3 32 × 4 (128)
4 50 (Included Title No.)
5 25 (Included Title No.)
6
(For text input via the RS-232C port)
Use the following procedure to apply names to the thumbnails used in chapter
menus, and also to add comments to be displayed on a chapter menu screen.
1 - 6
Names and comments are entered using a keyboard.
Set KEYBOARD STYLE from the SYSTEM MENU (1/2) screen in accordance
3
with the keyboard's input language.
The following description assumes that all operations are carried out by key-
6
board.
TEMP LOAD
For example, let's now apply a name to the first chapter.
1.
Use the arrow keys to select the first chapter from the THUMBNAIL EDIT
screen, and then press the Enter key.
• The thumbnail screen for this chapter will be displayed.
5000 sec
2.
Select TEXT INPUT using the arrow keys and then press the Enter key.
40/100
• A box for inputting text will appear.
3.
Enter a name or comment into the text box.
5000 sec
5000 sec
Notes
40/100 • The ¥ mark will become a backslash.
• If text cannot be entered, press the CTRL key (right side) on the keyboard.
4.
After the required text has been entered, press the Enter key.
• The text box will close.
1 - 6
The name just entered will be applied to the selected chapter.
* The text that has been input will be displayed on the chapter menu screen.
3
5.
Select BACK and then press the Enter key.
• The initial THUMBNAIL EDIT screen will again be displayed, and the name
6
or comment will be shown for the first chapter.
TEMP LOAD
-
Title & Chapter Menu Settings
TITLE INPUT
april
CANCEL
Select CANCEL and press the Enter key to
close the text box without applying the name
or comment that has been entered.
Enter a comment to be displayed on
the chapter menu screen.
Enter a name for the chapter
menu thumbnail. (Names can be
up to 20 characters in length.)
59