Advertisement
1. Headlight assembly
2. Repeat the procedure on the right side of the cab.
5
Installing the Horn
Parts needed for this procedure:
1
Horn assembly
1
Screw, 5/16 x 3/4 inch
1
Flange head nut, 5/16 inch
Procedure
1. Remove the 2 screws and washers securing the front
cover to the front axle brackets
the front cover.
Figure 6
2. Headlight bracket
(Figure
7). Remove
1. Flange head nut
2. Screw
3. Horn bracket
2. Mount the horn bracket to the left cover mounting
bracket with the 5/16 x 3/4 inch screw and 5/16 inch
flange head nut
3. Adjust the horn so the opening points down.
4. After the wire harness is connected to the horn, mount
the front cover to the front axle with the 2 screws
previously removed.
4
Figure 7
4. Front cover
5. Front axle bracket
6. Horn
(Figure
7).
Advertisement
