Trikdis FLEXi SP3 Installation And Programming Manual page 35

"Keypads" tab
 Serial – the keypad's serial number automatically detected by the control panel. To delete a keypad, enter zeros.

Keypad type – keypad type, automatically detected by the control panel.

Areas – specify the areas that the keypad can control.
Settings group "Keypad parameters"

Keypad type – specify the keypad type (Crow CR16, Paradox LED, Wiegand reader) connected to the control panel
(GRN, YEL terminals).
 Additional Wiegand on 1IO/2IO – tick the box if an additional RFID card reader will be connected. An additional
reader can be connected to the terminals IO1 and IO2, which cannot be used as inputs or outputs in this case.

Duress code type – choose a duress code type. If you are forced to arm or disarm the alarm system and enter the
duress code, the system will arm or disarm the system and will immediately send a silent warning to the CMS (central
monitoring station).

Fast ARM – the buttons ARM, STAY, SLEEP can be used to quickly arm the security system without entering a code.

Incorrect codes until lockout – enter the number of incorrect codes allowed before blocking the keypad.

Lockout timer – enter the time for how long the keypad will be blocked.
"RS485 modules" tab
www.trikdis.com
Security control panel „FLEXi" SP3
35 July 2020