Getting Started; Unpacking; Putting The Batteries Into The Remote Control; Connecting Speakers - JVC PC-XC370 Instructions Manual

Getting Started

Unpacking

After unpacking, check to be sure that you have all the
following items.
The number in the parentheses indicates the quantity of the
pieces supplied.
• AC power cord (1)
• Remote control (1)
If any is missing, consult your dealer immediately.

Putting the Batteries into the Remote Control

Insert 2 batteries — R6P(SUM-3)/AA(15F) — into the
remote control, by matching the polarity (+ and –) on the
batteries with the + and – markings on the battery
compartment.
When the remote control can no longer operate the unit,
replace both batteries at the same time.
1
3
• DO NOT use an old battery together with a new one.
• DO NOT use different types of batteries together.
• DO NOT expose batteries to heat or flame.
• DO NOT leave the batteries in the battery
compartment when you are not going to use the
remote control for an extended period of time.
Otherwise, it will be damaged from battery leakage.
2
R6P(SUM-3)/AA(15F)
(not supplied)

Connecting Speakers

Right speaker
Right speaker
cord
Connect the left speaker cord to the L speaker terminal and
the right speaker cord to the R speaker terminal.
To attach the speakers to the unit
Align the grooves with the guide rails on the unit, and push
the speaker down until it stops.
To detach the speakers from the unit
While pushing the lever to the direction of the arrow
("RELEASE"), pull the speaker up.
–6 –
Continued
Left speaker
Left speaker
cord