Common Operations; Turning On Or Off The Power; Setting The Clock; Selecting The Sources - JVC PC-XC370 Instructions Manual

Cd portable component system
Table of Contents

Advertisement

Available languages

Available languages

Common Operations

Turning On or Off the Power

To turn on the unit, press POWER
To turn off the unit (on standby),
press POWER
again.
To switch off the power supply completely, unplug the AC
power cord from the AC outlet.

Setting the Clock

Before operating the unit any further, first set the clock built
into this unit.
1 Turn on the power.
2 Press CLOCK for more than
2 seconds so that the
following indication blinks
on the display.
3 Press UP ¢ or 4 DOWN
to adjust the hour and
minute.
• When the button is kept pressed, the hour and minute
changes rapidly.
4 Press CLOCK.
To check the clock time
Press CLOCK while the unit is turned on.
Night time 12 o'clock is shown as "AM 12:00" and day time
12 o'clock is shown as "PM 12:00".
When the button is pressed again, the display shows the
previously engaged mode.
For the clock resetting
If a power failure occured or the power cord is disconnected,
the clock stops. In such case you need to set the clock again.

Selecting the Sources

When you press the play button for a particular source
.
(TUNER, TAPE, AUX, and CD 6), the unit turns on, and
the unit starts playing the source if it is ready.
To listen to FM/AM broadcasts, press TUNER. (See page
11.)
To play back CDs, press CD 6. (See page 13.)
To play back a tape, press TAPE. (See page 16.)
To select the external equipment as the source, press AUX.
CD playback starts also when you press 3 CD1, 3 CD2,
3 CD3, or LONG PLAY. (See page 13.)
When you press CD1 0, CD2 0 or
CD3 0
The unit is turned on, the corresponding
disc tray ejects, and the source is
automatically changed to CD.

Adjusting the Volume

You can adjust the volume level only while the unit is turned
on.
Turn JOG-VOLUME clockwise to
increase the volume or
counterclockwise to decrease it.
• The volume level can be adjusted
When using the remote control, press
VOLUME + to increase the volume or
press VOLUME – to decrease it.
Connect a pair of headphones to the PHONES jack. No sound
comes out of the speakers. Be sure to turn down the volume
before connecting or putting on headphones.
– 9 –
TUNER
TAPE
from VOL 0 (minimum) to VOL 25.
For private listening
DO NOT turn off (on standby) the unit with the volume
set to an extremely high level; otherwise, a sudden blast
of sound can damage your hearing, speakers and/or
headphones when you turn on the unit or start playing
any source next time.
Remember you cannot adjust the volume level while the
unit is on standby.
AUX
CD

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents