Marantz PM7000N Owner's Manual page 113

Contents Connections
Resetting network settings
If network contents cannot be played or the unit cannot connect to the network, restarting the unit may improve the problem. We recommend restarting the
unit before returning the settings to the default settings. (v p. 97)
If the operations are not improved by restarting the unit, follow the steps below.
Network settings are reset to the factory default values. Make settings again.
However, the menu "Audio" settings are not reset.
X
INPUT
Front panel Rear panel
Playback
BACK
113
Remote control
unit
Settings
1
Press X on the main unit to turn on power to the unit.
2
Turn the INPUT SELECTOR knob on this unit to select
"Internet Radio", "Music Servers" or "USB Music".
3
Press and hold the BACK and X buttons on this unit for
at least 3 seconds when the power is on.
4
Remove your fingers from the two buttons when
"Please wait..." appears on the display.
5
"Completed" is shown in the display when reset is
complete.
NOTE
0 Do not turn the power off until reset is complete.
Index
Tips Appendix