Connecting The Earphones; Storage When Not Using The Product - Silvercrest SWED 100 B1 User Manual And Service Information

the display. Further operation is only possible if you disable the button lock
by pressing the "LOCK" button (9) again for approximately one second.
The "LOCK" symbol (26) no longer flashes on the display (7).

Connecting the earphones

You can connect the supplied SWED 100 B1 earphones (C) to the
earphone jack (18). If the earphones are connected, the loudspeaker (16)
is automatically switched off and the volume is automatically reduced.

Storage when not using the product

If you will not be using the device for a long period of time,
remove any inserted batteries.
Store the device in a dry, cool place. To protect against dust,
we recommend storing the device in the pouch (B) supplied.
DANGER! To avoid hearing damage, you must set the
volume to the lowest level before connecting the
earphones. You can then adjust the volume to the desired
level. Please pay particular attention to the section
"Setting the volume".
DANGER! Do not use any other earphones than the
supplied SWED 100 B1 earphones. Other earphones
may create harmful sound pressure.
Take care when using earphones. Listening at full volume
for prolonged periods of time can damage your hearing.
SilverCrest SWED 100 B1
English - 27