Mounting The Chassis On A Din Rail - National Instruments NI cRIO-9111 User Manual And Specifications

Figure 8. Mounting an Eight-Slot Chassis on a Panel
Caution
M4 × 22 screws included in the kit to attach the chassis to the kit.
Caution
chassis from the panel.

Mounting the Chassis on a DIN Rail

You can order the NI 9912 DIN rail mount kit if you want to mount a four-slot CompactRIO
chassis on a DIN rail, or the NI 9915 DIN rail mount kit if you want to mount an eight-slot
CompactRIO chassis on a DIN rail. You need one clip for mounting the chassis on a standard
35 mm DIN rail. Complete the following steps to mount the chassis on a DIN rail.
1. Fasten the DIN rail clip to the chassis using a number 2 Phillips screwdriver and two
M4 × 22 screws. The screws are included in the DIN rail mount kit.
Figure 9. Fastening the DIN Rail Clip to a Four-Slot Chassis
If you are using the NI 9904/9905 panel mount kit, you must use the
Remove the I/O modules from the chassis before removing the
NI cRIO-9111/9112/9113/9114/9116/9118 | © National Instruments | 9