Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Canon RF600mm F11 IS STM
Summary of Contents for Canon RF600mm F11 IS STM
- Page 1 Instructions...
-
Page 2: Camera Firmware
Thank you for purchasing a Canon product. Canon RF600mm F11 IS STM and RF800mm Camera Firmware F11 IS STM are super-telephoto lenses for use with EOS R series cameras. Please use the latest version of firmware with the camera in use. For details on whether the firmware is the latest version or not, and for details on updating the “IS”... -
Page 3: Safety Precautions
Safety Precautions Precautions to ensure that the camera is used Details pertaining to risks that may Caution safely. Read these precautions thoroughly. Make result in injury or damage to other objects. sure all details are observed in order to prevent risks and injury to the user and other people. -
Page 4: General Precautions
General Precautions Handling Precautions Shooting Precautions Do not leave the product in excessive heat such as The lens uses a DO* lens. Colored flare might appear in a car in direct sunlight. High temperatures can around the light source depending on shooting cause the product to malfunction. - Page 5 General Precautions Shooting Precautions The aperture setting is fixed at f/11 on this lens, and cannot be adjusted. Adjust exposure using the shutter speed and ISO speed. Be aware of the following when selecting a shooting mode. • If [P] mode is selected, shutter speed is adjusted while the aperture setting remains fixed at f/11, and so actually it is the same as if selecting [Av] mode.
- Page 6 This device complies with Part 15 of the FCC Rules. CAN ICES-3 (B) / NMB-3 (B) Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- Page 7 Lens mount (→ 7) Tripod mount (→ 14) The illustrations used in the explanations in this manual show the RF600mm F11 IS STM, but the RF800mm F11 IS STM is used in the same way. For detailed information, reference page numbers are provided in parentheses (→ **).
-
Page 8: Attaching And Detaching The Lens
1. Attaching and Detaching the Lens Lens mount index Set the camera’s power switch to OFF when attaching or detaching the lens. Attach the lens cap before detaching the lens from the camera. After detaching the lens, place the lens with the rear end up and attach the dust cap to prevent the lens surface and contacts from getting scratched. - Page 9 2. Preparing to Shoot (Extending/Retracting the Lens) Before shooting, extend the lens barrel to the shooting position and lock it as follows. You cannot shoot while the lens is retracted. Turn the lock ring toward Extend the lens barrel With the lens barrel extended, “UNLOCK”...
-
Page 10: Setting The Focus Mode
3. Setting the Focus Mode Focus mode switch Be sure to update the camera’s firmware so it is compatible with this lens. The range-finding area with the camera* after updating the firmware is an area of the image plane of approx. 40% horizontal x approx. 60% vertical. -
Page 11: Control Ring
Range ring operations may be recorded when shooting Full (4.5m-∞) movies. RF600mm F11 IS STM 12m-∞ Full (6m-∞) The clicking sensation of the control ring can RF800mm F11 IS STM 20m-∞ be removed by the Canon Service Center. (chargeable) ENG-10... -
Page 12: Image Stabilizer
6. Image Stabilizer This function provides image stabilization When using a tripod, the Image Stabilizer might appropriate for shooting conditions (such as not be fully effective or it might be better to set shooting still subjects and panning shots). the image stabilizer switch to OFF, depending on the type of tripod and where the tripod is located, as well as on the camera’s settings such as shutter speed. - Page 13 7. Hood (Sold Separately) The custom lens hood cuts out unwanted light and protects the front of the lens from rain, snow, and dust. Attachment position mark Red dot Button ●Detaching the Hood Red dot Red dot Keep your finger pressed down on the button Attachment position mark Stop position mark located on the side of the hood, and then turn...
- Page 14 8. Extenders (Sold Separately) Use an extender RF1.4× or RF2× to shoot a larger image of a subject. Lens specifications when using an extender are as follows. RF600mm F11 IS STM RF800mm F11 IS STM Lens Extender RF1.4× RF2× RF1.4×...
-
Page 15: Tripod Mount
You can attach filters to the filter mounting thread on the lens. on the front of the lens. Only one filter may be attached. If you need a polarizing filter, use the Canon Circular Polarizing Filter PL-C B. Detach the hood when adjusting the polarizing filter. -
Page 16: Specifications
The maximum diameter, length and weight listed are for the lens itself only. Close-up Lens cannot be attached because there is no size that fits the lens. All data listed is measured according to Canon standards. Product specifications and appearance are subject to change without notice. - Page 17 CT1-D135-B 0320SZ © CANON INC. 2020...