Page 1
Form No. 3379-218 Rev A Tow Pole Hitch for End-Dump Concrete Mixers Model No. 68130 Model No. 68131 Model No. 68132 Installation Instructions Safety WARNING Safety and Instructional CALIFORNIA Proposition 65 Warning Decals This product contains a chemical or chemicals...
Page 2
Installation Loose Parts Use the chart below to verify that all parts have been shipped. Procedure Description Qty. Tow pole Front stabilizer leg (shipped with the machine) Install the tow pole. Short bolt Long bolt Locknut Hitch assembly Flange-head bolt Install the hitch assembly.
Page 3
Installing the Hitch Assembly Parts needed for this procedure: Hitch assembly Flange-head bolt Locknut G023350 Procedure Figure 3 1. Using 2 flange-head bolts and 2 locknuts, loosely install the hitch assembly in the middle position of the 5. Align the top rear hole in the front stabilizer leg (Figure mounting plate.
Page 4
G023353 Figure 6 G023355 Figure 7 Ball hitch shown 1. Keyhole 3. Safety chain 1. Top position 3. Bottom position 2. Rod or wire (not included) 4. Connecting link 2. Middle position 2. Attach the safety chain to the length of rod or wire 4.