Toro Workman 133-0959 Installation Instructions Manual

Power converter kit gtx electric utility vehicle

Download this manual

Power Converter Kit

Workman

Model No. 133-0959

This product contains a chemical or chemicals known to the State of California to

Preparing the Machine and Disconnecting the Negative Cable

8111 Lyndale Avenue South

Bloomington, MN 55420

GTX Electric Utility Vehicle

WARNING

CALIFORNIA

Proposition 65 Warning

cause cancer, birth defects, or reproductive harm.

Form No. 3405-191 Rev A

Installation Instructions

Original Instructions (EN)

Printed in the USA

Page 1 This product contains a chemical or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. Preparing the Machine and Disconnecting the Negative Cable © 2016—The Toro® Company Register at www.Toro.com. Original Instructions (EN) All Rights Reserved *3405-191* A...
Page 2 Assembling the Converter Plate...
Page 3 Routing the Wire Harness...
Page 4 Connecting the Wire Harness to the Machine Graphic Reference Connector Description Label Insulated Spade 6.3 mm (1/4 inch) To Cab +12V Power Insulated Receptacle 6.3 mm (1/4 inch) To Cab 12V Ground Non-Insulated Receptacle 6.3 mm (1/4 inch) To 48V Fuse Block Insulated Terminal Ring (#8) To 48V Ground Block 4 Socket...
Page 5 Connecting the Wire Harness to the Front Converter Graphic Reference Connector Description Label 4 Socket No label is attached. 4 Pin To Machine Converter Connector 4 Socket To Machine Converter Note: Use cable ties to secure the wire harness away from sharp or moving parts.
Page 6 Mounting the Relay to the Converter Assembly Note: Use cable ties to secure the wire harness away from sharp or moving parts. Connecting the Negative Cable...
Page 7 Notes:...