Repair And Maintenance - Razor UB1 Owner's Manual

REPAIR & MAINTENANCE
Front Tire Replacement
Tools Required: Two (2) 5 mm Allen Wrenches
1
Using two (2) 5 mm Allen wrenches, loosen the axle bolt. Remove wheel and install replacement wheel.
(Note the sequence of the hardware)
Battery Replacement
Tool Required: Phillips Screwdriver
B
A
B
A
B
1
Using a Phillips screwdriver remove the seven (7)
screws and remove the battery cover.
B
A
B
A
B
3
Set battery cover back in place and secure with the
seven (7) screws.
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
Bolt
Spacer
A (4 PCS) B (3 PCS)
A
A
2
Using a Phillips screwdriver remove the four (4)
screws from the battery bracket, locate and disconnect
the battery from the controller, remove the battery and
replace with new battery. Reconnect the controller and
replace the four (4) screws.
A (4 PCS) B (3 PCS)
A
A
Spacer
Bolt
10