Hitachi CS 33EDP Service Manual page 12

3. Disassembly and reassembly of the recoil starter ass'y
[Tool required]
• Phillips screwdriver
(1) Disassembly
• Use a Phillips screwdriver to loosen the four Tapping Screws (W/Flange) D4 x 20 (Black) [36], and
then remove the Recoil Starter Ass'y (NS) [198] and Air Deflector Ass'y [188].
NOTE: During disassembly, the spiral spring may come off and jump out. To prevent injury or
other accidents, wear protective goggles and work gloves.
• Turn the Reel (NS) [191] about one-fourth clockwise by hand and remove the Starter Rope (NS) [186]
from the Reel (NS) [191] with the Starter Rope (NS) [186] loosened.
• Loosen the Set Screw (NS) [189] to remove the Cam Plate (NS) [190], Reel (NS) [191] and Spiral
Spring (NS) [192].
CAUTION: Removing the Reel (NS) [191] without releasing the windings of the Spiral Spring
(NS) [192] may cause the Spiral Spring (NS) [192] to jump out, possibly resulting in
injury.
• Recoil starter ass'y
Recoil Starter Ass'y (NS) [198]
Starter Handle Ass'y [183]
• Disassembly of the recoil starter ass'y
Starter Rope (NS) [186]
Reel (NS) [191]
Rope Stopper [184]
Starter Knob [185]
Starter Rope (NS) [186]
Fan Case (NS) [187]
Starter Knob [185]
-11-
Air Deflector Ass'y [188]
Set Screw (NS) [189]
Cam Plate (NS) [190]
Reel (NS) [191]
Tapping Screw (W/Flange)
D4 x 20 (Black) [36]
Starter Rope (NS) [186]
Cam Plate (NS) [190]
Spiral Spring
(NS) [192]
Set Screw (NS) [189]