Related Manuals for Vision Fitness TM356
Summary of Contents for Vision Fitness TM356
- Page 1 DELUXE UPPER BOARD ENGINEERING GUIDE S T A N D A R D C O N S O L E F O R : (TM356) (T9200 DELUXE, T9500 DELUXE, T9600 DELUXE, T9250 DELUXE, T9550 DELUXE) TREADMILL.ENG.TM356.REV2 Date of last revision: 10.08...
- Page 2 Model and Unit (Metric/US) Max Time Default Weight Accumulated Time Accumulated Distance Belt Thickness (depending on model) Roller Diameter Elevation motor Pause Time 5:00 10:00 Default Time Default Age Disable Beep Set Language Elevation Errors Exit Date of last revision: 10.08 TREADMILL.ENG.TM356.REV2...
- Page 3 T9500 0-12% elevation 0-12% elevation 0.5-10 mph/ 0.8-16 kph 0.5-12 mph/ 0.8-20 kph T9550 T9600 0-12% elevation 0-15% elevation 0.5-12 mph/ 0.8-20 kph 0.5-12 mph/ 0.8-20 kph T9200 0-12% elevation 0.5-10 mph/ 0.8-16 kph TREADMILL.ENG.TM356.REV2 Date of last revision: 10.08...
- Page 4 6. To look at these numbers after calibration go into engineering mode and go to ENG1; press “ENTER” 7. In P2 and P3 the speed will be displayed. Press to read the PWM value. “ENTER” P4 and P5 represent the elevation values Date of last revision: 10.08 TREADMILL.ENG.TM356.REV2...
- Page 5 This is a safety precaution to warn the user that power is still being applied to the board. This safety switch condition occurs in any mode, including engineering modes. When the magnet reconnects to the console, the board resets. Any activity or run time information prior to the reconnection will be lost. TREADMILL.ENG.TM356.REV2 Date of last revision: 10.08...
- Page 6 P15 represents the program default time, which is displayed in the upper right window. Most programs have a default time of 30 minutes. You can modify this time by using the arrows. Press and hold “SPEED” “ELEVATION” to save the new value. “ENTER” Date of last revision: 10.08 TREADMILL.ENG.TM356.REV2...
- Page 7 “ENTER” to program setup. ** SPECIAL NOTE When treadmill is first set-up, auto-calibration can be bypassed by pressing STOP This will take the console to the start-up screen. TREADMILL.ENG.TM356.REV2 Date of last revision: 10.08...
Need help?
Do you have a question about the TM356 and is the answer not in the manual?
Questions and answers