Step 4: Level Your Washer - Insignia NS-TWM45W1 User Manual

INSTALLATION INSTRUCTIONS

Step 4: Level your washer

CAUTION:
Don't use your washing machine without leveling it. If your washer isn't level, it may:
• Vibrate excessively which can cause your washer to malfunction
• Make excessive noise
• Indicate error codes E3 or E4 when your washer is running
Extend the leveling feet only as much as is necessary. If the feet are extended too
much, your washer may vibrate.
Determine if your washer is level by checking the position of the tub or by using a
level.
Slide your washer into position.
1
Open your washer's lid, then pour water into the tub to the leveling circle. If
2
your washer is level, the water touches the leveling circle all the way around. If
your washer isn't level, the water only touches part of the leveling circle.
Leveling circle
Washer is level - the
water touches the
leveling circle all the
way around.
www.insigniaproducts.com
NS-TWM45W1
Washer not level - the
water does not touch
the leveling circle all
the way around.
29