Adjustment Of Feed (Stitch) Length And Backstitch; Adjustment Of The Needle Thread Guide; Setting Of Bobbins - Mitsubishi Electric LT2-2250-B1T Instruction Manual

HOW TO USE
5 Adjustment of feed (stitch)
length and backstitch
● A djustment of feed (stitch) length...Adjust feed
length by turning the feed length setting dial
while pushing PUSH lever.
● B ackstitch...Direction of stitching can be
reversed by depressing the reverse sewing
lever or pushing the touch back switch.
Feed length setting dial
Reverse sewing lever
Touch back
switch
6 Adjustment of the needle
thread guide
Adjust the needle thread guide of the needle
thread tension adjuster according to the fabric, the
thread, and sewing condition.
Left side
Needle
thread
guide
position
Fabric Heavy
Needle
thread
supply

7 Setting of bobbins

Threading in the rotating hook (with tension
spring) and installation of the bobbin case
( 1 ) Pass the bobbin thread slit ① so that the thread
can be unwound on the left side of the bobbin.
( 2 ) Pass the bobbin thread in the order from ① to
④ in the figure.
( 3 ) Match the protruded portion of the rotating
hook with recessed portion Ⓐ of the bobbin
case and install the hook and the bobbin case
to the rotating hook shaft.
( 4 ) Set the bobbin case latch lever.
( 5 ) Leave the thread tail on the bed.
Bobbin case
②Guide eye
③Guide eye
— 7 —
Center
Standard
More Standard
④Spring
①Slit
Ⓐ
Thread
Bobbin
Right side
Light
Less
Bobbin case
latch lever