Table of Contents
Advertisement
Available languages
Available languages
TROUBLESHOOTING
Your SRE-3050 is not operating correctly. What should you do?
Before calling your Bruno dealer, refer to the solutions listed below. This could save you
an unnecessary service call!
• Seat swivel. Is the seat locked in the riding position?
• Footrest. Is there an obstruction on the stairway that the footrest is contacting?
• Carriage safety panels. Is there an obstruction on the stairway that the carriage
• Main circuit breaker (or fuse) panel of residence. Has a breaker tripped or a fuse
• Battery charger. A discharged battery will cause the carriage to move more slowly
• Visual check. Do you notice anything about your stairlift that is different or out of
place?
If your SRE-3050 continues to function improperly or not at all after completing the
preceding checklist, contact an authorized Bruno dealer to perform all required
service, repair and maintenance operations.
©Bruno Independent Living Aids, Inc.
safety panels are contacting?
until the voltage drops to the point where the controller will shut
off. If this should occur, pause for a moment, then run the carriage
down to exit the seat.
Partially charged batteries will run the carriage down, but not up.
Confirm that the charger is plugged into a live outlet and wait for
the batteries to charge. Red and green LED's are illuminated.
Is the battery charger plugged into a functional outlet? Do not use
outlets which are controlled by a wall switch.
Is the RED power light on?
Has the circuit breaker of the residence tripped? Has a fuse blown in
the electrical panel of the residence?
®
blown?
16
SRE-3050 OPERATOR 01 NOVEMBER 2019
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the ELAN SRE-3050 and is the answer not in the manual?
Questions and answers
My stairlift stops like every other step
The Bruno ELAN SRE-3050 stairlift may stop every other step if the folding rail is not fully folded up. The stairlift will not continue up until the folding rail is completely in its up position. A continuous beep and flashing yellow LED indicate the rail is in motion.
This answer is automatically generated