Programming Key - Ojmar OCS Manual

2º With white smooth card
(*) NOTE: The OCS with card is only valid for white ISO 7810 cards.
3.2 Program m ing key
The programming key is a peripheral device capable of interacting with the OCS locks and management software.
Its main functions are:
Master and service key
§
Initialisation key and start up
§
Deletion key
§
User key
§
Event reading key
§
A same programming key can carry out all of the functions described above, as it can be configured as many times as you want
using the management software.
OCS SOFTWARE
Figure 2.1.- OCS programming key
OJMAR 5