Roborock S6 Pure User Manual page 16

Installation
Connect to the app
5. Connect to the app. (recommended)
Download the Roborock app or Xiaomi home app
a. Search "Roborock" in the App Store or Google Play, Or
scan the QR code below, then download and install the app.
b. Search "Xiaomi home" in the App Store or Google Play, Or
scan the QR code below, then download and install the app.
Reset WiFi
a. Open the top cover of the robot to reveal the WiFi
indicator light.
b. Press and hold the button and the
hear the "Reset WiFi" voice alert. When the WiFi indicator
light is flashing slowly, the robot has entered network
configuration mode.
Note:
If you cannot connect your phone to the robot, reset the WiFi, and add your robot as
a new device.
Open the app and click "+" in the top right corner, then
follow the instructions in-a pp. Once your robot has been
added, it will be found in a list on the homepage.
Note:
• Due to ongoing app development, the actual process may differ slightly from the
above description. Always follow the instructions given in the app.
• Only 2.4GHz WiFi is supported.
button until you
12
Add device
WiFi indicator light
• Off: WiFi disabled
• Slow flashing: Waiting for
connection
• Fast flashing: Connecting
• Steady: WiFi connected