Installing Cables - Huawei SmartACBox Quick Manual

5.2 Knocking Off the Barrier Chip from a Cable Hole
•
Before connecting the PE cable, AC input
power cable, and AC output power cable
for the first time, knock off the barrier chips
from the cable holes 1 and 2 for the AC
input power cable and the cable hole for
the AC output power cable.
•
The edges of the cable holes for the AC
input and output power cables are sharp.
Recommended: Use a file to smooth the
edge of the cable hole. Protect yourself
during operation from being hurt.
•
The FEK-65B cable glands of Mirai
Industry Co., Ltd. are recommended for
the cable holes for the AC input and output
power cables.
5.3 Routing a Cable Through a Cable Gland (COM)
1. Remove the gland and cap
from the cable gland.
2. Route the cable through the
gland and then cable gland.
3. Connect the cable.
4. Tighten the gland.
6

Installing Cables

6.1 Preparing Cables
Prepare cables and OT terminals based on site requirements.
No. Cable
AC input power
1
cable
AC output power
2
cable
Single-phase
3
input power cable
Recommended Model or Specifications
Three-core outdoor copper armored cable with
an OT-M5 terminal
Three-core outdoor copper armored cable with
an OT-M12 terminal
Three-core outdoor copper armored cable with
an OT-M4 terminal (protective earthing)
8
Cross-sectional Area
Range of the Cable
2
3.5–8 mm
2
150–200 mm
2
2–5.5 mm