Installing The Router - Huawei SmartACBox Quick Manual

3
Opening the Enclosure Door
•
Before opening the enclosure door, turn off all upstream switches for the SmartACBox. If you
have to operate an energized SmartACBox, wear insulation gloves and take preventive
measures.
•
If you need to open the enclosure door on rainy or snowy days, take protective measures to
prevent rain or snow from entering the enclosure. If it is impossible to take protective measures,
do not open the enclosure door on rainy or snowy days.
1. Insert the key into the lock hole in the enclosure door and open the lock.
2. Open the enclosure door and install the
support bar.
Remove the four screws from the cover. Start from the one at the lower left corner, and then the
rest in counterclockwise sequence.
4

Installing the Router

NOTE
•
The SmartACBox is not factory-installed with a router, so you need to purchase and install a
router by yourself.
•
This document introduces how to install an SC-RRX230 or SC-RRX280 router produced by
SUN DENSI in Japan.
4.1
Installing the Router Antenna
NOTE
An SC-RRX230 or SC-RRX280 router is supplied with a 1P184-FMM800W-5M5 or 1P184-DP-
BR0-RE remote outdoor antenna.
1P184-FMM800W-5M5 Antenna
1. Remove the screw assemblies from the router tray and remove the antenna support.
2. Install the antenna support in the upper part of the left wall of the enclosure and secure it using
the removed M4 screw assemblies.
3. Secure the router antenna on the support by attaching the antenna base to it.
3. Hold the handles on the cover and
remove the cover.
5