Chapter 3 Function List; Recording Function - Mitsubishi Electric MELSEC iQ-R Series User Manual

3
FUNCTION LIST
This chapter shows the function list of System Recorder.
For details on each function, refer to the following:
MELSEC iQ-R System Recorder User's Manual (Application)
3.1

Recording Function

The recording function can be used to output data in a CPU module to a recording file when a file saving trigger is satisfied
and save it to an SD memory card inserted in a recorder module.
Item
Setting name
Recording target data
Recording method
*1
Recording startup trigger
*1
File saving trigger
(A specified time elapses after
completion of data accumulation)
File saving trigger
(Rise or fall of a device of a CPU
module)
Devices and labels that can be sampled
Sampling method
*5
Time interval
Number of settings
Devices that can be specified as triggers
Condition
*2
Accumulation period
Number of settings
Specification
Elapsed time after completion of data
*2
accumulation
Number of settings
Devices that can be specified as triggers
Condition
*2,*3
Saving period before trigger
*2,*3
Saving period after trigger
Trigger comment
Specification
Number of available characters: Up to 32 characters
Available character: Unicode Basic Multilingual Plane
Character code: UTF-16LE
• Devices and labels of a CPU module
• Event histories saved in a CPU module
• File saving trigger only
• Recording startup trigger + file saving trigger
1 per recording setting
Refer to the following:
MELSEC iQ-R System Recorder User's Manual
(Application)
• Rise
• Fall
• 1 to 86400 s
• 1 to 1440 m
• 1 to 24 h
1 per recording setting
• Specify
• Not specify
• 0 to 86400 s
• 0 to 1440 m
• 0 to 24 h
Up to 16 per recording setting
Refer to the following:
MELSEC iQ-R System Recorder User's Manual
(Application)
• Rise
• Fall
• 0 to 86400 s
• 0 to 1440 m
• 0 to 24 h
0 to 60 s
Number of available characters: Up to 32 characters
Available character: Unicode Basic Multilingual Plane
Character code: UTF-16LE
Refer to the following:
MELSEC iQ-R System Recorder User's Manual
(Application)
• Each scan
*4
• Time specification
• Trigger instruction (instruction name: DATATRG)
• 1 to 60000 ms
• 1 to 86400 s
• 1 to 1440 m
• 1 to 24 h
3 FUNCTION LIST
3.1 Recording Function
3
17