Philips 9000 Series Manual page 13

Dry shaving
1 Switch on the appliance.
2 Move the shaving heads over your skin in circular movements to
catch all hairs growing in different directions (Fig. 20). Make sure
each shaving head is fully in contact with the skin. Exert gentle
pressure for a close, comfortable shave.
Note: Do not press too hard, this can cause skin irritation.
3 Clean the appliance after use.
Wet shaving
For a more comfortable shave, you can also use this appliance on a
wet face with shaving foam or shaving gel.
To shave with shaving foam or shaving gel, follow the steps below:
1 Apply some water to your skin (Fig. 21).
2 Apply shaving foam or shaving gel to your skin (Fig. 22).
3 Rinse the shaving unit under the tap to ensure that the shaving
unit glides smoothly over your skin (Fig. 23).
4 Switch on the appliance.
5 Move the shaving heads over your skin in circular movements to
catch all hairs growing in different directions (Fig. 20). Make sure
each shaving head is fully in contact with the skin. Exert gentle
pressure for a close, comfortable shave.
Note: Rinse the shaving unit regularly to ensure that it continues to
glide smoothly over your skin.
6 Dry your face.
7 Clean the appliance after use.
Note: Make sure you rinse all foam or shaving gel off the appliance.
Using click-on attachments
Note: The accessories supplied may vary for different products. The
box shows the accessories that have been supplied with your
product.
Note: Attach the click-on cleansing brush attachment on the
attachment base first, before placing it on the appliance (Fig. 24).
13
English