Video And Audio; Adjusting The Volume; Selecting A Video Source - Huawei RP100-55T User Manual

HUAWEI RP100-55T Room Presence
User Guide

7.1 Adjusting the Volume

To obtain the optimal conference audio effect, you can adjust audio output in multiple modes.
If the RP100-55T is in a conference, you can press
increase or decrease the volume heard at the local site. The volume from the PC and the
whole conference system is adjusted accordingly.

7.2 Selecting a Video Source

You can set video input interfaces for the local video, local presentation, and remote video.
Local Video Source
Press
Local Presentation Source
After a conference starts, select Presentation source from the option bar. From the
Presentation source screen, select a local presentation source.
Remote Video Source
During a conference, you can select to view a remote video source.
To select a remote video source, press
Issue 01 (2013-12-20)
If a headset is used, you will hear conference audio through the headset.
, and then select a camera or other video sources.
For details about how to perform operations on the option bar, see section 6.1 "Customizing the Option
Bar."
Each remote video source is identified by a camera icon. In certain cases, however, the device connected
to the remote codec is not a camera.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
7

Video and Audio

or
on the remote control, and then select a camera.
7 Video and Audio
on the remote control to
55