Body Sculpture BT-3134 User Manual page 8

STEP 1
Open the carton，take out the above spare parts，put the Main Frame on the level ground.
STEP 2
1.Push up the Computer and L& R upright as the arrow position.
2. Screw off M8*16 bolt(51) and Arc washer（64）on right upright.
3. Use the 5# Allen wrench(12), M8*16 bolt(51) and Arc washer （ 64） , fix the computer frame onto the
right and left upright.
Notice: the wire in the upright can not be pressed and pls check and make sure the wire is connected
well. hold the upright and computer by hand, that they will not fall down escaping any hurt.
6