At#Rfsts - Read Current Network Status - Telit Wireless Solutions ME310G1 At Commands Reference Manual

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
3.2.30.

AT#RFSTS - Read Current Network Status

Command reads current network status.
SIM Presence Setting saved
Required
AT#RFSTS
Execution command returns the current network status. The format of the returned message is
according to the network on which the module is registered.
GSM network
#RFSTS:<PLMN>,<ARFCN>,<RSSI>,<LAC>,<RAC>,<TXPWR>,<MM>,<RR>,<NOM>,<CID>,
<IMSI>,<NetNameAsc>,<SD>,<ABND>
Parameters
<PLMN>
<ARFCN>
<RSSI>
<LAC>
<RAC>
<TXPWR>
Parameter/values
<MM>
0
3
5
6
7
8
9
10
13
14
15
17
18
19
20
21
22
23
24
25
255
Parameter/values
<RR>
2
80617ST10991A Rev.4
Can be aborted
No No
Country code and operator code (MCC, MNC)
GSM Assigned Radio Channel
Received Signal Strength Indication
Localization Area Code
Routing Area Code
Tx Power
Mobility Management state (for debug purpose only)
NULL
LOCATION UPDATING INITIATED
WAIT FOR OUTGOING MM CONNECTION
CONNECTION ACTIVE
IMSI DETACH INITIATED
PROCESS CM SERVICE PROMPT
WAIT FOR NETWORK COMMAND
LOCATION UPDATE REJECTED
WAIT FOR RR CONNECTION LOCATION UPDATE
WAIT FOR RR CONNECTION MM
WAIT FOR RR CONNECTION IMSI DETACH
WAIT FOR REESTABLISHMENT
WAIT FOR RR ACTIVE
IDLE
WAIT FOR ADDITIONAL OUTGOING MM CONNECTION
CONNECTION ACTIVE GROUP TRANSMIT
WAIT RR CONNECTION GROUP TRANSMIT
LOCATION UPDATING PENDING
IMSI DETACH PENDING
RR CONNECTION RELEASE NOT ALLOWED
UNKNOWN
Radio Resource state (for debug purpose only)
CELL SELECTION
Page 159 of 545
MAX timeout
-
Description
Description
Description
SELINT
2
2020-04-15