Euroboor ECO.36+ User Manual
  1. Manuals
  2. Brands
  3. Euroboor Manuals
  4. Drill
  5. ECO.36+
  6. User manual

Euroboor ECO.36+ User Manual

Low profile magnetic drilling machine with 2-way electromagnet
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User manual
V 1.1 EN
Low profile magnetic drilling machine
with 2-way electromagnet

ECO.36+

Serial number:
Date of purchase:
/
/
Don't forget to register your machine at:
www.euroboor.com/register
[ only when registered you benefit from extended warranty ]

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ECO.36+ and is the answer not in the manual?

Questions and answers

Related Manuals for Euroboor ECO.36+

Summary of Contents for Euroboor ECO.36+

  • Page 1: Eco.36

    User manual V 1.1 EN Low profile magnetic drilling machine with 2-way electromagnet ECO.36+ Serial number: Date of purchase: Don’t forget to register your machine at: www.euroboor.com/register [ only when registered you benefit from extended warranty ]...
  • Page 2 Congratulations on purchasing this premium magnetic drilling machine. At EUROBOOR we strive to exceed our customers’ expectations by developing and providing premium and innovative portable drilling and cutting solutions. We believe that a professional like you must be able to rely on a professional supplier.

  • Page 3: Table Of Contents

    Table of contents ECO.36+ ............................1 Table of contents ......................... 3 1. Safety ............................4 1.1 General safety instructions ......................4 1.2 Specific safety information ......................6 2. Description ..........................8 2.1 Intended use ..........................8 2.2 Description and features ....................... 8 2.3 Case content ..........................

  • Page 4: Safety

    1. Safety 1.1 General safety instructions Do not use this magnetic drilling machine before you have thoroughly read and completely understood this manual, specifically the “General safety instructions” and ‘’Specific safety information’’ , including the figures, specifications, safety regulations and the signs indicating DANGER, WARNING and CAUTION.
  • Page 5 If you detect damage have the machine serviced before use. Many accidents are caused by poorly maintained tools; 10. Only use accessories that are recommended by EUROBOOR for your machine model. Accessories that are suitable for one machine may become hazardous when used on another...

  • Page 6: Specific Safety Information

    • Always use the recommended speed for the accessories and material you are working with; • Do not use the machine on the same workpiece on which electric welders are working; • Only use an appropriate cutting lubricant. EUROBOOR offers a wide range of well-considered cooling and lubrication products to match your requirements;...
  • Page 7 Residual risk In spite of following the relevant safety regulations and their implementation, certain residual risks cannot be avoided. These are: Impairment of hearing; • Risk of personal injury from flying particles; • Risk of burns due to accessories becoming hot during operation; •...

  • Page 8: Description

    EUROBOOR. The magnetic drilling machine can be used horizontally, vertically or overhead. 2.2 Description and features...

  • Page 9: Case Content

    Additional serial no. stickers are provided with the machine for your administration. The serial number will help you, your dealer and EUROBOOR to validate and identify the machine. For example:...

  • Page 10: Technical Data

    2.5 Technical data Metric Imperial Ø 12 - 36 mm Ø 7/16" - 1 7/16" Annular cutting Ø 1 - 14 mm Ø 1/16" - 9/16" Twist drilling Threading Ø 10 - 40 mm Ø 3/8" - 1 9/16" Countersinking 0°...

  • Page 11: Environmental

    Millimeter Unit of measure for the dimensions. " Inch Unit of measure for the dimensions. Kilogram Unit of measure for the mass. Pound Unit of measure for the mass. Volt Unit of measure for the electric voltage. Ampere Unit of measure for the electric current intensity. Watt Unit of measure for the output.

  • Page 12: Preparation & Adjustment

    3. Preparation & adjustment 3.1 Assembly WARNING: To reduce the risk of injury, turn machine off and disconnect from power source before installing and removing accessories, before adjusting or changing set- ups or when making repairs. Be sure all switches are in the OFF position. An accidental start-up can cause injury.
  • Page 13 4. To release the ratchet feed handle from the machine, press the release button on the ratchet feed handle and pull it away from the machine; [image 3-3] 5. It is possible to position the ratchet feed handle on either side of the machine. Method of fitting and releasing (steps 1.
  • Page 14 Mounting the safety guard The safety guard protects against chippings and accidental contact and must always be mounted before operation. 1. Place the drill guard in front of the machine. Make sure the long slots on the side clip over the small humps protruding from the gearbox body.
  • Page 15 [image 3-6]...
  • Page 16 1. Make sure the flow regulator is closed; 2. Unscrew the cap; 3. Fill the container with cutting fluid; 4. Screw the cap back on. WARNING: Do not use the lubrication system in vertical or overhead drilling applications. Instead use EUROBOOR cutting paste.
  • Page 17 Fitting the safety strap The safety strap should always be used during operation. Use of the safety strap limits the risk of personal injury when for some reason the magnet comes loose from the workpiece (such as loss of power supply). In no way does the use of the safety strap clear the operator from following other safety and operating instructions.

  • Page 18: Prior To Use

    The electric motor has been designed for one voltage only. Always check that the power supply corresponds to the voltage on the rating plate. Your EUROBOOR magnetic drilling machine is designed in class I (grounded) according to EN 61029-1. Earth wire is required.
  • Page 19 Useful tips – Try a few simple projects using scrap material until you develop a ‘’feel’’ for the magnetic drilling machine; – Let the machine run in for a period of eight to ten hours before starting with big operations. Do not load the machine too much during this run-in period;...

  • Page 20: Using The Machine

    4. Using the machine WARNING: Always observe the safety instructions and applicable regulations. WARNING: To reduce the risk of serious personal injury, turn the machine off and disconnect the machine from power source before making any adjustments or removing/installing attachments or accessories. 4.1 Carrying handle This machine is designed to be carried by hand only, with the use of the integrated retractable carrying handle.

  • Page 21: Control Panel

    4.2 Control panel The control panel on your magnetic drilling machine is designed for maximum ease of use and safety. 1. Magnet switch 2. Motor switch 3. Power cable [image 4-2] 4.3 2-Way electromagnet Make sure the magnetic drilling machine is placed on a smooth, clean, level and solid surface without any objects or debris to guarantee maximum adhesion.

  • Page 22: Switching Motor On And Off

    We want to point out that above mentioned precautions and indicators do not guarantee that the magnet will not release from the material. EUROBOOR accepts no liability when it comes to the magnet not functioning or functioning poorly.

  • Page 23: Gyro-Tec Safety

    4.5 GYRO-TEC safety This EUROBOOR magnetic drilling machine is equipped with GYRO-TEC safety functionality. It features a gyroscopic sensor which detects acceleration and displacement in any direction. Whenever the machine recognizes a sudden or unwanted movement the motor will be shut down automatically by the machine’s electronics.

  • Page 24: Carbon Brushes

    * Disclaimer: EUROBOOR is not liable for any damage caused to the machine due to electrical problems in the workplace. Above mentioned protection is not guaranteed in all cases of voltage and frequency spikes or fluctuations. EUROBOOR accepts no liability when it come to the power surge or fluctuation protection not functioning or functioning poorly.
  • Page 25 WARNING: Do not use the lubrication system in vertical or overhead drilling applications. Instead use EUROBOOR cutting paste. Make sure to use only suitable cutting lubricants. EUROBOOR offers a wide range of cutting lubricants for all tool and material combinations. Proper cooling will help you create better and faster...

  • Page 26: Working With Drilling Accessories

    5. Working with drilling accessories 5.1 Annular cutters Annular cutters only cut material at the periphery of the hole, rather than converting the entire hole to shavings. As a result, the energy required to make a hole is lower than for a twist drill. When drilling with an annular cutter, it is not necessary to drill a pilot hole.
  • Page 27 Always make sure the power plug is disconnected Line-up one of the flats on the cutter shank with the white dot (image 5-2, ①); Rotate the lock ring in counter clockwise direction to open up the tool holder and hold the lock ring.

  • Page 28: Twist Drills

    8. Apply a regular pressure while drilling. The drilling performance does not improve by putting more pressure on the machine. Too much pressure will overload the motor and your annular cutter will be worn sooner; A continuous, non-discoloured iron swarf is a sign of correct drilling speed and a well- cooled, sharp cutter.

  • Page 29: Maintenance

    6. Maintenance Your EUROBOOR magnetic drilling machine has been designed to operate over a long period of time. Continuous satisfactory operation depends upon proper tool care and regular cleaning. CAUTION: To reduce the risk of injury, turn the machine off and disconnect machine from power source before installing and removing accessories, before adjusting or changing set- ups or when making repairs.
  • Page 30 Repair, modification and inspection of EUROBOOR Magnetic drilling machines must be done by EUROBOOR or an EUROBOOR authorised dealer. The spare parts list will be helpful if presented with the machine to the EUROBOOR dealer for service when requesting repair or other maintenance.

  • Page 31: Trouble Shooting

    7. Trouble shooting Magnet and motor do not - The magnet switch is not connected to the power supply function - Damaged or defective wiring - Defective fuse - Defective magnet switch - Defective control unit - Defective power supply Magnet does function, the motor - Damaged or defective wiring does not work...
  • Page 32 Insufficient magnetic force - Damaged or defective wiring - Bottom of magnet not clean and dry - Bottom of magnet not flat - Workpiece is not bare metal - Workpiece is not clean or flat - Workpiece is less than 6 mm (too thin) - Defective control unit - Defective magnet Frame under voltage...

  • Page 33: Exploded Views & Spare Parts List

    8. Exploded views & spare parts list 8.1 Exploded views...

  • Page 36: Spare Parts List

    8.2 Spare parts list No. Art. no. Description No. Art. no. Description 34 036.0022 Bearing 61807 DDU 036.0043 Torx screw M4.8 x 55 35 036.0009 Shaft 036.0111Z End cover 110 - 220 Volt 36 036.0044 Torx screw M5 x 45 Led indicator red alarm 37 036.0023 Bearing 61808 DDU...
  • Page 37 No. Art. no. Description No. Art. no. Description Front panel ECO.36+ 020.0036 Main cable 220V EU 036+.0015 220V 020.0036/AU Main cable Australia Front panel ECO.36+ 020.0036/UK Main cable UK 220v 036+.0015A 110V 020.0036/UK Main cable UK 110v 16A 85 036+.0016 Rear panel ECO.36+ 110-16A 86 036.0036...

  • Page 38: Wiring Diagram

    8.3 Wiring diagram...

  • Page 39: Warranty And Service

    Service To maximise the lifetime of your EUROBOOR machine always use service and parts from an official EUROBOOR distribution channel. Whenever in need of such, always contact original point of sales or if no longer existent the distributor of EUROBOOR products in your country.

Table of Contents