Euroboor ECO.50 User Manual
  1. Manuals
  2. Brands
  3. Euroboor Manuals
  4. Drill
  5. ECO.50
  6. User manual

Euroboor ECO.50 User Manual

Magnetic drilling machine
Hide thumbs Also See for ECO.50:
Table of Contents

Advertisement

Quick Links

EUROBOOR
FOR PROFESSIONALS BY PROFESSIONALS
USER MANUAL
ECO.50
Magnetic Drilling Machine
SERIAL NO.____________
DATE OF PURCHASE __________

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ECO.50 and is the answer not in the manual?

Questions and answers

Related Manuals for Euroboor ECO.50

Summary of Contents for Euroboor ECO.50

  • Page 1 EUROBOOR FOR PROFESSIONALS BY PROFESSIONALS USER MANUAL ECO.50 Magnetic Drilling Machine SERIAL NO.____________ DATE OF PURCHASE __________...
  • Page 2 Congratulations on your purchase of the Euroboor ECO.50 Portable Magnetic Drilling Machine. Your model is designed to produce superior holes quickly and efficiently. Through years of experience, constant innovation and development, Euroboor BV is committed to provide you with metal cutting tools and products to help you be more productive.
  • Page 3 Fig. 1 ISSUE 1/Original version/OCT 2013...
  • Page 4 Symbol Term, meaning Explanation Be absolutely sure to read the enclosed Read documentation documentation such as the Instruction Manual and the General Safety Instructions. Wear ear protection Use ear protection during operation. Wear eye protection Use eye-protection during operation. Danger/warning/caution Observe the information in the adjacent text! European conformity symbol Confirms the conformity of the power tool with...

  • Page 5: General Power Tool Safety Warnings

    GENERAL POWER TOOL SAFETY WARNINGS Do not use this power tool before you have thoroughly read and completely understood this Instruction Manual and the “General Safety Instructions”, including the figures, specifications, safety regulations and the signs indicating DANGER, WARNING and CAUTION. WARNING: When using electrical tools basic safety precautions should always be followed to reduce the risk of fire, electrical shock and personal injury including following.
  • Page 6 If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. 9. Use only accessories that are recommended by Euroboor BV for your model. Accessories that may be suitable for one machine, may become hazardous when used on another machine.

  • Page 7: Residual Risks

    ADDITIONAL SPECIFIC SAFETY RULES FOR MAGNETIC DRILLING MACHINES • Keep your fingers well out of the drill area; • Avoid touching the drilled core that is automatically ejected by the centering pin when the working procedure is finished. Contact with the core when it is hot, or if it falls, can cause personal injuries;...
  • Page 8 Markings on Tool The following pictograms are shown on the tool: Read instruction manual before use. Wear ear protection in areas with noise emissions > 80 db(A). Wear eye protection. POSITION Serial number The Serial Number, which also includes the type of machine, the year and month of manufacturing and identification number, is engraved on the frame, magnet and the motor unit.
  • Page 9 TECHNICAL DATA ECO.50 ANNULAR CUTTERS ø 12 - 50 mm TWIST DRILLS ø 1 - 23 mm LENGTH 245 mm WIDTH 160 mm HEIGHT 385-550 mm STROKE 170 mm WEIGHT 13,5 kg MAGNET (L x W x H) 170 x 85 x 48 mm...

  • Page 10: Description (Fig. 1)

    Please make sure that the contacting surface for the magnet is level, clean and rust-free. Remove any varnish or primer. When working on materials that are not magnetizable, suitable fixation devices, obtainable as accessories from EUROBOOR, e. g. suction plate, vacuum plate or pipe-drilling device must be used.
  • Page 11 3. Fill the container with cutting fluid; 4. Screw the cap back on. WARNING: Do not use the lubrication system in vertical or overhead drilling applications. Instead use Euroboor cutting paste FITTING THE SAFETY CHAIN 1. Pass the safety chain through the opening near the grip;...
  • Page 12 Make sure that the magnet attaches tightly to the work piece before turning on the motor unit of the magnetic drilling machine. Euroboor magnets have 2 coils; make sure that both coils are in contact with the material. Do not connect any other machines to the electrical outlet the magnetic drilling machine is plugged into, as it may result in the loss of magnetic force.
  • Page 13 TURNING MACHINE ON AND OFF THE CONTROL PANEL The control panel on your magnetic drilling machine is designed for maximum operating facility and safety. 1 - The Motor Switch: This switch is used to switch the motor unit ON and OFF; 2 - The Magnet LED Indicator: This LED indicator shows the generated magnetic force;...

  • Page 14: Drilling A Hole

    DRILLING A HOLE Now that you have read the explanatory information and safety recommendations above, you are ready to actually start drilling. Follow these 10 steps for best drilling result : Use the tip of the pilot pin to determine the center of the hole to be drilled. Turn the magnet on and verify that the drill is in the right position and that the machine is pushed tight against the work piece.
  • Page 15 Optional Accessories WARNING: Since accessories, other than those offered by EUROBOOR, have not been tested with this product, use of such accessories with this tool could be hazardous. To reduce the risk of injury, only EUROBOOR recommended accessories should be used with this product.

  • Page 16: Maintenance

    MAINTENANCE Your EUROBOOR power tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning. CAUTION: To reduce the risk of injury, turn unit off and disconnect machine from power source before installing and removing accessories, before adjusting or changing set- ups or when making repairs.
  • Page 17 Repair, modification and inspection of Euroboor Magnetic drilling machines must be done by EUROBOOR or an EUROBOOR authorized dealer. The spare parts list will be helpful if presented with the machine to the Euroboor dealer for service when requesting repair or other maintenance.

  • Page 18: Troubleshooting

    TROUBLE SHOOTING Magnet and motor do not - The magnet switch is not connected to the power supply function - Damaged or defective wiring - Defective fuse - Defective magnet switch - Defective Control Unit - Defective power supply Magnet does function, the motor - Damaged or defective wiring does not work - Carbon brushes are stuck or worn out...

  • Page 19: Protecting The Environment

    Separate collection. This product must not be disposed of with normal household waste. Should you find one day that your EUROBOOR product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product available for separate collection.
  • Page 20 SPARE PART LIST AND EXPLODED VIEW of ECO.50 Nr.: Article: Description Nr.: Article: Description 050.0112 Screw 4,8x45 020.0056 Frame 032.0106 Screw 4,8x50 020.0106 Screw SSM6x16 020.0111 Washer M6 050.0116 Adaptor ring rubber 22x2,5 020.0096 Setting Nut 050.0466 Bearing 20x37x9 020.0091 Setting Screw 050.0221...
  • Page 21 EXPLODED VIEW of ECO.50 ISSUE 1/Original version/MARCH 2013 21 21...
  • Page 22 ISSUE 1/Original version/MARCH 2013 22 22...

  • Page 23: Ce/Emc Declaration Of Conformity

    Kryptonstraat 110 Zoetermeer The Netherlands that the following Appliance complies with the appropriate basic safety and health requirements of the EC Directives based on its design and type, as brought into circulation by EUROBOOR BV. Designation/ function Magnetic Drilling Machine Type ECO.50...

This manual is also suitable for:

Eco.32Eco.32-t

Table of Contents