Assembling The Blower - Toro 51701 Operator's Manual

121-7691
138-6699
Setup
Register your product at www.Toro.com to ensure that Toro can
notify you in the case of a safety or warranty product recall.
Note:
The battery pack is not fully charged at the time of
purchase. Before using the tool for the first time, refer to
the Battery Pack (page

Assembling the Blower

1. Slide the blower tube onto the sweeper. You may need to
press down on the tabs to install the blower tube properly
(Figure 2).
decal121-7691
decal138-6699
1. Tabs
2. Align the tongue of the battery pack with the cavity in the
handle housing, grasp the handle, and push the battery pack
into the handle until the latch locks into place
1. Battery latch
3
5).
Figure 2
(Figure
Figure 3
Charging
g019526
3).
g019551