Installing The Battery Pack; Removing The Battery Pack - Toro Flex-Force Power System Operator's Manual

Installing the Battery Pack

1. Set the chain saw down on a level surface.
2. Align the tongue of the battery pack with the
battery cavity in the chain saw
Figure 24
3. Push the battery pack into the battery cavity until
the battery pack locks into place.

Removing the Battery Pack

1.
2.
(Figure 24).
1. Latch
g315702
17
Place the chain saw on a flat surface.
Press down on the latch and remove the battery
pack from the cavity.
Figure 25
g315763