Advanced Settings Menu - Toro 74946 Software Manual

Advanced Settings Menu

When the advanced settings menu is selected, the
module prompts you for a 4 digit passcode. The
default digits on the display screen are 0 0 0 0.
Figure 27
1. Enter password
2. Active digits
3. Increase
The passcode is 1 9 8 2. When the active digit is
highlighted, press the increase or decrease buttons to
scroll through digits from 0 to 9. Press enter to select
the highlighted digit.
If the incorrect password is entered, the module
takes you back to the menu select screen. When the
correct password is entered, you can scroll between
the following screens:
•
Engine Oil (page 10)
•
Hydraulic Trans Oil (page 10)
•
Historical Error (page 10)
•
Alarms (page 11)
•
Engine Settings (page 11)
•
Calibrate Engine Settings (page 12)
•
Factory Defaults (page 12)
Engine Oil
After performing the necessary maintenance, this
screen allows you to reset the number of hours until
the engine oil service is due.
Figure 28
1. Engine Oil
2. Reminder display
g030221
4. Enter/Return
5. Decrease
g030245
3. Remaining hours until
service
4. Reset
Pressing the reset button brings up a screen asking to
confirm the reset reminder.
Hydraulic Trans Oil
After performing the necessary maintenance, this
screen allows you to reset the number of hours until
the hydraulic transmission oil service is due.
1. Hydraulic Trans Oil
2. Reminder display
Pressing the reset button brings up a screen asking to
confirm the reset reminder.
Every time you reset the hydraulic transmission oil
service reminder, the module prompts you to select
whether the machine was serviced with Toro Premium
Hydraulic Oil. Pressing Y (yes) or N (no) determines
the correct maintenance schedule.
Historical Error
This screen displays errors that are no longer active.
The log keeps a running count of the number of times
the error has occurred during the life of the machine
and the engine hour at which the last occurred. The
log displays the errors starting with the most recent
occurrence.
1. Historical Error
2. Current error (e.g. Low Oil
Pressure)
10
Figure 29
3. Remaining hours until
service
4. Reset
Figure 30
3. Number of times the error
occurred during life of
machine (e.g., 3X)
4. Engine hour at which the
error last occurred
g030246
g030224