Page 1
Go to the Control Panel on badge laptop Hardware & Sound Devices & Printers Right click Solid 510 Printer and select Printer Properties Select the Service Tab Click “Clean Printer” After clicking, the Clean Printer program will give you steps to follow to clean the printer.
Page 2
Listed below are steps as you see them from Printer Properties: Step 1. Make sure printer is turned on and prepare the exclusive long cleaning card. Step 2. Open the hopper and top cover and remove the card and ribbon cartridge.
Page 3
Step 3. Insert the long cleaning card into the printer through input hopper. When the long cleaning card is inserted to the cleaning roller, it should move automatically. It is normal that the exclusive long cleaning card is inserted to the ends and rollers are moving to clean. Step 4.
Page 4
Step 5. Wait until the cleaning is completed. When the cleaning is completed, the exclusive long cleaning card will be ejected automatically as the picture. Step 6. Remove the exclusive long cleaning card and install ribbon cartridge into the printer. If you need assistance contact Debbie Russell #4803 or derussell@irvingisd.net.
Need help?
Do you have a question about the Solid 510 and is the answer not in the manual?
Questions and answers