Step 1
Product Option 2)*
Indoor Unit Option
Installation Option
Installation Option
1)*
is a setting needed to supply optimized power to wired remote controller when multiple
indoor units are connected to wired remote controller in a group.
2)* The total option codes are 24 digits. You can set six digits at a time and it is distinguished by page number. Press
the OK button to move to the next page. [See the image
Step 2
Step 3
Address
1 2)*
2 2)*
Description
00 to 4F
00 to FE
Refer to the installation
manual of the connected
indoor unit.
00 to 15
A to F
C
]
Default
-
-
-
-
-
-
-
English
19