Installation/Service Mode; Additional Functions Of The Wired Remote Controller [See The Image B ] - Samsung MWR-WW10N Installation Manual

Installation/Service mode

Additional functions of the Wired Remote Controller [See the image
1 If you want to use the various additional functions for your Wired Remote Controller, press the
buttons at the same time for more than 3 seconds.
The password entry screen appears.
2 Enter the password, "0202," and then press the
The settings screen for installation/service mode appears.
3 See the list of additional functions for the Wired Remote Controller on the next page, and then select the desired
menu.
Once you have entered the setting screen, the current setting appears.
Refer to the chart for data setting.
Using the / buttons, change the settings and press the
Press the button to save the new setting.
Press the button to move to the Home screen.
NOTE
While setting the data, you can press the
at a pop-up screen.
button.
button to move to the next setting.
button to move to the Home screen after checking the saving status
]
B
and
English 15