Table of Contents
Advertisement
using the buttons
CLK
TME
AVG
MAX
TRP
ODO
Mode
Figure - Buttons on the Incite
6i computer
To set the computer, you must
buttons in a specific sequence.
Easy setup (ReSet)
2
MH
Set
When setting the computer, there
are three ways to use the buttons. To
help you remember, notice the way
each term is underlined. To help you
remember, these terms will look the
same throughout the manual.
Push
- touch once
Cycle
- push repeatedly as needed
Hold- push and hold in for two or
three seconds
The buttons on the computer are
(Figure 11):
Set•
button on the right side
Mode
button on the bottom
Push
Cycle
,
, or Hold the two
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the INCITE 6i and is the answer not in the manual?
Questions and answers
Does a incite 6i or 9i computer work with sensors set up on a bike with for a 8i computer
The Trek Incite 6i, 8i, 9i, and 11i computers share similar sensor setup requirements. Since there is no mention of model-specific sensor incompatibilities, the 6i or 9i should work with sensors set up for an 8i computer as long as the magnet and sensor are properly aligned and installed.
This answer is automatically generated