Using The Buttons - Trek INCITE 11i Owner's Manual

using the buttons

MPH
F
CLK TME AVG MAX TRP AVG
Mode
Figure 2- Buttons on the Incite
9i and i computer
To set the computer, you must
buttons in a specific sequence.
To set the units
Mode
Cycle
1.
Set•
2. Hold
KMH or MH flashes.
Easy setup (reSet)
2
When setting the computer, there
are three ways to use the buttons. To
help you remember, notice the way
each term is underlined. To help you
remember, these terms will look the
Set
same throughout the manual.
Push
Cycle
Hold- push and hold in for two or
three seconds
The buttons on the computer are
(Figure 12):
Set•
Mode
to MAX (Figure 12).
- touch once
- push repeatedly as needed
button on the right side
button on the bottom
Push Cycle
, , or Hold the two