JVC TK-T2100RU Instructions Manual

Fixed ir dome camera

Advertisement

Quick Links

FIXED IR DOME CAMERA 
TK‐T2100RU                                      INSTRUCTIONS  
TK‐T2100RE 
 
For Customer Use:
 
Enter  below  the  Model  No.  which  is  located  on 
the body. 
Retain this information for future  
reference. 
Model No.___________  
Serial No.
 
 
 
 
Thank you for purchasing this product. 
Before  operating  this  unit,  please  read 
the  instructions  carefully  to  ensure  the 
best possible performance 
LST1442‐001A

Advertisement

Table of Contents
loading

Summary of Contents for JVC TK-T2100RU

  • Page 1 FIXED IR DOME CAMERA  TK‐T2100RU                                      INSTRUCTIONS   TK‐T2100RE      For Customer Use:   Thank you for purchasing this product.  Enter  below  the  Model  No.  which  is  located  on  Before  operating  this  unit,  please  read  the body.  the  instructions  carefully  to  ensure  the  Retain this information for future   best possible performance  reference.    Model No.___________     Serial No.   LST1442‐001A...
  • Page 2 Important Safety Information Installation and serving should be performed only by qualified and experienced technicians to conform  to all local codes and to maintain your warranty.  • To reduce the risk of fire or electric shock, do not expose the product to rain or moisture. WARNING! Power Supply • This dome camera can operate on DC12V only. • Connect only one camera to the power line, DC12V. Do not share the power line with other equipment.
  • Page 3: Table Of Contents

    Table of Contents     Operating Notes.............................. 4 1. Product overview ............................5 1.1 Before You Begin ............................ 5 1.2 Unpack everything............................ 5 1.3 Physical Characteristics .......................... 5 1.4 Routine Maintenance  .......................... 6 2. Installation and Connection ........................7 2.1 Disassembling the Camera  ........................ 7 2.2 Connecting the Wiring .......................... 7 2.3 Mounting the Camera .......................... 8 2.4 Adjusting the Camera Position ........................ 9...
  • Page 4: Operating Notes

    Operating Notes Operating Conditions  This camera has been designed for indoor use. It cannot be used outdoors.  Avoid viewing very bright objects (example, light fixtures) for extended periods.  Avoid operating or storing the unit in the following locations: ...
  • Page 5: Product Overview

    FIXED IR DOME CAMERA  INSTRUCTIONS  SAFETY PRECAUTIONS  WARRANTY CARD (Only for TK-T2100RU)  TEMPLATE  SCREW (x2) and SCREW ANCHOR (x2) If any parts are missing or damaged, contact the dealer you purchased the camera from. 1.3 Physical Characteristics 1.3 TK-T2100RU, TK-T2100RE 1/2...
  • Page 6: Routine Maintenance

      1.3 TK-T2100RU, TK-T2100RE 2/2   IGURE 1-1: P ABLE ICTORIAL NDEX EFINITION Index # Description Conduit hole: Used for surface runs power/video connector Bottom case Camera housing Dome cover IR board Video Output Terminal DC 12V Power Connector: Make sure to connect the power connector to correct ports (Red+/Black–).
  • Page 7: Installation And Connection

    2. Installation and Connection 2.1 Disassembling the Camera Before you mount and adjust the camera, follow these steps to disassemble the camera. 1. Insert a coin or flat tool to the side hole and twist to remove the dome cover. 2.
  • Page 8: Mounting The Camera

    2.3 Mounting the Camera Attach the mounting template to the wall or ceiling. ① Drill two holes, then insert the screw anchors into the holes. ②. Secure the bottom case to the wall or ceiling with the TP4 x 15 mm tapping screws supplied Recommendation: ③...
  • Page 9: Adjusting The Camera Position

    2.4 Adjusting the Camera Position The dome camera has th ree axes for positioning the camera. While monitoring the picture on the monitor, adjust the camera position as follows:  Pan Adjustment: Rotate 3D assembly in the base. Do not turn assembly more than ±177°as this may cause the internal cables to twist and disconnect or break.
  • Page 10: Completing The Installation

    2.5 Completing the Installation On ce all adjustments are done, attach and secure the camera housing: 1. Use a soft, lint-free cloth to wipe the dome cover clean and remove fingerprints. 2. Assemble the dome cover and the bottom case 1.
  • Page 11: Specifications

    Specifications Specifications Model  Fixed IR dome Camera  Model Name TK-T2100RU TK-T2100RE Video System  NTSC  PAL  Image System / IC  Image Device 1/3" type IT-CCD Pixel Elements Effective pixels: 768 (H) × 494 (V) Effective pixels: 752 (H) × 582 (V) Total pixels: 811 (H) ×...
  • Page 12     LST1442‐001A © 2012    ...

This manual is also suitable for:

Tk-t2100re

Table of Contents