Mitsubishi Electric 700 Series Instruction Manual page 19

INSTALLATION AND WIRING (FR-E700 SERIES (E kit))
(3) Install the option protective cover.
(4) Securely fit the connector of the plug-in option to the inverter connector along the guides.
(5) Securely fix the both top and bottom of the plug-in option to the inverter with the accessory mounting
screws.(tightening torque 0.45N⋅m to 0.55N⋅m) If the screw holes do not line-up, the connector may not
have been plugged snugly. Check for loose plugging.
(6) Remove the PU cover provided on the front cover for plug-in option and install the other PU cover,
which was removed in (2).
(7) When wiring to the plug-in option is completed, install the front cover for plug-in option to the inverter.
(6) Replace
14
Front cover
for plug-in option
plug-in option
(7)
(5)
Mounting screws
(4)
Option connector
of inverter
(3) Option protective cover