INSTALLATION AND WIRING (FR-A700/F700 SERIES)
2.3
Wiring
2.3.1
Wiring of FR-A7AX
Untwist the twisted pair shielded cables after stripping its sheath.
Also, perform protective treatment of the shield to ensure that it will not
make contact with the conductive area.
Strip off the sheath for the below length. If the length of the sheath peeled
is too long, a short circuit may occur with neighboring wires. If the length
is too short, wires might come off.
Wire the stripped cable after twisting it to prevent it from becoming loose.
(Do not solder it.)
Cable stripping length
Use a blade type terminal as required.
8
5mm
Shield
(perform protective treatment)
Sheath
Twisted pair
shielded cable