Opentx Companion Software (Opentx Companion); Software Download And Installation - RadioMaster TX16S User Manual
Hide thumbs
Also See for TX16S:
- Quick start manual (14 pages) ,
- Manual (3 pages) ,
- User manual (20 pages)
Table of Contents
Advertisement
2. OpenTX Companion software (OpenTX
companion)
The OpenTX Companion remote control support software is used for many
different tasks, such as loading OpenTX firmware to the remote, backing up model
settings, editing model settings, and running the remote simulator.
You can run OpenTX Companion software on multiple computer platforms.
OpenTX Companion software supports common systems such as Windows, Mac OS X,
and Linux. Even without a remote control, you can experience all the functions and
settings of the remote control in a computer simulator.
You can get the latest version of OpenTX Companion software here:
http://www.open-tx.org/
2.1. Software Download and Installation
1. Download the latest version of OpenTX Companion software from
http://www.open-tx.org/.
2. Install OpenTX Companion software (take windows version 2.3.6 as an example)
Double-click the installer companion-windows-2.3.6.exe.
9
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the TX16S and is the answer not in the manual?
Questions and answers
My radiomaster tx16s throttle stick also moves my elevator when I Apply throttle up.
This issue occurs when the throttle and elevator channels are mixed or incorrectly assigned. Possible reasons include:
1. Incorrect Channel Mapping: The transmitter may have the wrong channel order set. Ensure that the throttle and elevator are assigned to separate channels in the transmitter settings.
2. Mode Setting: If the transmitter is set to the wrong mode (e.g., Mode 1 instead of Mode 2), the sticks may not function as expected. Verify that the transmitter is set to the correct mode.
3. Calibration Issue: If the gimbals were not calibrated properly, unintended movements may occur. Recalibrate the gimbals in the transmitter settings.
4. Mixing Settings: There may be an unintended mix configured in the transmitter that links throttle and elevator movement. Check the mixer settings and remove any unwanted mixes.
5. Flight Controller Settings: If using Betaflight or another flight controller software, check input mappings to ensure the correct channels are assigned.
By reviewing these settings, you should be able to separate the throttle and elevator controls.
This answer is automatically generated