Reset Function - RadioMaster TX16S User Manual
Hide thumbs
Also See for TX16S:
- Quick start manual (14 pages) ,
- Manual (3 pages) ,
- User manual (20 pages)
Table of Contents
Advertisement
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the TX16S and is the answer not in the manual?
Questions and answers
My radiomaster tx16s throttle stick also moves my elevator when I Apply throttle up.
This issue occurs when the throttle and elevator channels are mixed or incorrectly assigned. Possible reasons include:
1. Incorrect Channel Mapping: The transmitter may have the wrong channel order set. Ensure that the throttle and elevator are assigned to separate channels in the transmitter settings.
2. Mode Setting: If the transmitter is set to the wrong mode (e.g., Mode 1 instead of Mode 2), the sticks may not function as expected. Verify that the transmitter is set to the correct mode.
3. Calibration Issue: If the gimbals were not calibrated properly, unintended movements may occur. Recalibrate the gimbals in the transmitter settings.
4. Mixing Settings: There may be an unintended mix configured in the transmitter that links throttle and elevator movement. Check the mixer settings and remove any unwanted mixes.
5. Flight Controller Settings: If using Betaflight or another flight controller software, check input mappings to ensure the correct channels are assigned.
By reviewing these settings, you should be able to separate the throttle and elevator controls.
This answer is automatically generated