Related Manuals for Wren Kitchens WALL UNIT 672 L Corner
Summary of Contents for Wren Kitchens WALL UNIT 672 L Corner
- Page 1 WALL UNIT 672 L Corner Assembly Guide For Internal Use: FI.WR.INS.038_WKIN00128_WALL720_672_LCnr_Rev4.indd...
- Page 2 WALL UNIT BEFORE YOU START 672 L Corner INSTALLATION Assembly Guide SHOULD BE PERFORMED BY A COMPETENT PERSON ONLY. THIS PRODUCT COULD BE DANGEROUS IF INCORRECTLY INSTALLED Panel A Panel S Panel B Panel C Panel D Loose Shelf Loose Shelf Frontal Corner Post x1 Back Panel...
- Page 3 WALL UNIT 672 L Corner Step 1. Seat dowel Assembly Guide (F) into holes in Seat (G) end panel (B) as cam dowel shown. into hole as shown. Step 2. Seat cam dowel (G) into holes in end panel (B) as shown.
- Page 4 WALL UNIT 672 L Corner Step 5. Seat dowel (F) Assembly Guide into holes in both panels (B) Seat (G) cam dowel as shown. into hole as shown. Step 6. Seat expanding cam dowel (G) into holes in both end panels (B) as shown.
- Page 5 WALL UNIT Step 9. 672 L Corner Seat dowel (F) into holes in both panels (D) as Seat (W) Assembly Guide cam dowel shown. into hole as shown. Step 10. Seat cam dowel (W) into holes in panel (D) as shown. Step 11.
- Page 6 WALL UNIT 672 L Corner Assembly Guide Step 13. Slide back panel (S) into groove of panels (C). Step 14. Slide back panel (A) into groove of side panel (B) while also allowing panel (S) slide into the groove of panel (A). Step 15.
- Page 7 WALL UNIT 672 L Corner Step 17. Hanging Brackets steps a,b & c to be carried out on both Assembly Guide sides as shown Care to be taken. Hanging procedure is neccesary for a safe installation. Detail A Detail A Detail A Step a Step b...
- Page 8 WALL UNIT Step 20. 672 L Corner Measure appropriately and attach the 3 x hanging bracket plates onto the wall screwing through the provided holes into your wall. Assembly Guide Screws for fixing to walls are not provided as these vary depending on your wall material and construction.
- Page 9 WALL UNIT Step 24. Align corner post to frontal. Equally space 672 L Corner 2 x fixing plates (U) to the back of frontal & corner post. Assembly Guide Ensure a 3mm gap is maintained between frontal & post once fixed together. Screw in place using 4 x 15mm screws (L) Step 25.
- Page 10 WALL UNIT 672 L Corner Assembly Guide...
- Page 11 WALL UNIT 672 L Corner Assembly Guide...
Need help?
Do you have a question about the WALL UNIT 672 L Corner and is the answer not in the manual?
Questions and answers