Related Manuals for Wren Kitchens BASE UNIT 600 Built Under Oven Housing
Summary of Contents for Wren Kitchens BASE UNIT 600 Built Under Oven Housing
- Page 1 BASE UNIT 600 Built Under Oven Housing Assembly Guide For Internal Use: FI.WR.INS.031_WKIN00110_BASE_600_BUOH_Rev3.indd...
- Page 2 BASE UNIT BEFORE YOU START 600 Built Under Oven Housing INSTALLATION SHOULD BE PERFORMED BY A Assembly Guide COMPETENT PERSON ONLY. THIS PRODUCT COULD BE DANGEROUS IF INCORRECTLY INSTALLED Panel B Panel C Panel E Legs Filler F Filler G x2 Rail Panel x2 End Panel x1 Base Panel...
- Page 3 BASE UNIT 600 Built Under Oven Housing Step 1. Seat dowel (F) Assembly Guide into holes in panels as shown. Seat (G) cam dowel into hole as Step 2. shown. Seat cam dowel (G) into holes in panels as shown. Dowel (F) &...
- Page 4 BASE UNIT 50mm 600 Built Under Oven Housing Assembly Guide Step 5. Front Secure each of the legs into place with 4 x 15mm screws (L) as shown. 85mm Leg position diagram Step 6. Push leg firmly down into leg base. Adjust legs to 155mm before turning carcass upright.
- Page 5 BASE UNIT 600 Built Under Oven Housing Assembly Guide Securing to Adjacent Units Screw into any side units using the 30mm screws (K) provided to secure to unit. Screw at the top and bottom of both sides of the unit, place a cover cap (M) on the head to conceal it.
- Page 6 BASE UNIT Filler F 600 Built Under Oven Housing Assembly Guide Small Bracket Filler G Step 7. Use 15mm screw (L) per small L Bracket (FF) to secure to inside face of Filler (G). Attached equally spaced as shown. from top 15.5mm inside face inside face...
- Page 7 BASE UNIT 600 Built Under Oven Housing Step 9. Part B Assembly Guide Secure dummy fixing clip Parts (B) onto the inside face at the bottom of Part A panel (F), 17mm from the edge spaced evenly either side as shown, using Dummy Fixing Clip screws (L).
Need help?
Do you have a question about the BASE UNIT 600 Built Under Oven Housing and is the answer not in the manual?
Questions and answers