Wren Kitchens BASE UNIT 600 Assembly Manual
2/3 drawer
Hide thumbs
Also See for BASE UNIT 600:
- Assembly manual (12 pages) ,
- Fittings manual (7 pages) ,
- Assembly manual (8 pages)
Related Manuals for Wren Kitchens BASE UNIT 600
Summary of Contents for Wren Kitchens BASE UNIT 600
- Page 1 BASE UNIT 600 - 1000 Hob 2/3 Drawer Assembly Guide 2 Drawers 2 Drawers 1000 3 Drawers For Internal Use: FI.WR.INS.058_WKIN00112_BASE_600-1000_2-3Drw_Hob_Rev1.indd...
- Page 2 BASE UNIT BEFORE YOU START INSTALLATION 600 - 1000 Hob SHOULD BE PERFORMED BY A 2/3 Drawer COMPETENT Carcass Assembly PERSON ONLY. THIS PRODUCT COULD BE DANGEROUS IF INCORRECTLY INSTALLED Standard Drawer (Packed Separately) Fitting Pack Contents (J) x16 (Q) x4 (N) x1 METAL BACK PANEL Drawer Runner...
- Page 3 BASE UNIT Step 1. Secure drawer base to drawer side using 4 x 16mm drawer runner screws (J) in holes provided. Drawer 600 - 1000 Hob base 2/3 Drawer Seat the edge of drawer base tight into corner of casing, as shown. Standard Drawer Decorative face...
- Page 4 Step 1. BASE UNIT Secure drawer base to drawer side using Drawer 4 x 16mm drawer runner screws (J) in base 600 - 1000 Hob holes provided. Seat the edge of drawerbase tight 2/3 Drawer Decorative into corner ofcasing, as shown. Deep Drawer face The decorative face of drawer base...
- Page 5 BASE UNIT BEFORE YOU START 600 - 1000 Hob INSTALLATION 2/3 Drawer SHOULD BE PERFORMED BY A Carcass Assembly COMPETENT PERSON ONLY. THIS PRODUCT COULD BE DANGEROUS IF INCORRECTLY INSTALLED sink rail + screws 600 - *off 800 - *off 1000 - *off Panel A Panel B...
- Page 6 BASE UNIT Drawer runner bracket screw position 600 - 1000 Hob 2/3 Drawer Assembly Guide 37mm 261mm 431mm 74mm 2 drawer from base Step 1. To attach drawer runner 646mm screw into end panels (B) 636mm using 2 x 16mm screws (J) per drawer rail, into pilot holes provided, 3rd hole from front,...
- Page 7 BASE UNIT 600 - 1000 Hob Step 2. 2/3 Drawer Seat dowel (F) into holes in Assembly Guide both end panels (B) as shown. Seat (G) cam dowel into hole as shown. Step 3. Seat cam dowel (G) into holes in both end panels (B) as shown.
- Page 8 BASE UNIT 600 - 1000 Hob 2/3 Drawer Assembly Guide Step 6. Slide back panel (A) into groove of end panels (B). The back Panel (A) is to be modified accordingly to suit Customer Requirements,prior to inserting into cabinet. for 1000 width cabinets, the Back panel.
- Page 9 BASE UNIT 600 - 1000 Hob Front 2/3 Drawer Assembly Guide Step 9. Secure each of the legs into place with 2 x 15mm screws (L). 600-800 Width Cabinets, 4 legs 1000 with Cabinets, 5 legs Ensure legs are rotated as shown so that part of it is supporting the end panels (B).
- Page 10 BASE UNIT 600 - 1000 Hob 2/3 Drawer Assembly Guide Securing to adjacent units Screw into any side units using the 30mm screws (K) provided to secure to the unit. Screw just to the rear at the top and bottom of both sides of the unit, place a cover cap (M) on the head to conceal it.
- Page 11 BASE UNIT 600 - 1000 Hob 2/3 Drawer Assembly Guide For Internal Use: FI.WR.INS.058_WKIN00112_BASE_600-1000_2-3Drw_Hob_Rev1.indd Page 10...
Need help?
Do you have a question about the BASE UNIT 600 and is the answer not in the manual?
Questions and answers